IBM NetVista Hardware Maintenance Manual page 95

004 -
•
Perform the following under Windows 98.
NOTE: If an operating system other than Microsoft
Windows 98 is installed, the program screens
and icons may differ from these instructions.
1. Start Microsoft Windows 98.
2. Select the Start icon.
3. Select Settings, then select Control Panel.
4. Select the Sound icon.
5. In the Sound window, select chimes from the
Names field. (To test other adapter card software,
select an action from a menu in that software.)
005 - IS THE PREVIEW BUTTON, OR ACTION IN
OTHER SOFTWARE, SELECTABLE ON THE
SCREEN (SHOWN IN BLACK AND NOT GRAY)?
(YES, GO TO STEP 006. NO, READ AHEAD.)
•
Ensure that Windows 98 is properly installed.
•
Go to step 001.
006 -
•
Select the Preview button from the Sound window.
007 - DO YOU HEAR ANY SOUND FROM THE
SPEAKER? (YES, READ AHEAD. NO, GO TO
STEP 008.)
•
The audio feature is functioning normally. Click
Cancel to close the dialog box. Exit Microsoft
Windows 98.
•
If the symptom remains or has changed, go to
"Index of Symptoms, Messages, Error Codes, or
Beeps" on page 38.
•
End.
008 -
•
Make sure that the volume control is not turned
low.
•
Make sure that the speaker and its adapter are not
damaged.
•
Make sure that the speaker is plugged in speak-
out jack. See "System Board Jumpers and
Connectors" on page 109.
Check Procedures 61