Lenovo J200 Hardware Maintenance Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Desktop
  5. J200
  6. Hardware maintenance manual
Lenovo J200 Hardware Maintenance Manual

Lenovo J200 Hardware Maintenance Manual

Hardware maintenance manual
Hide thumbs Also See for J200:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Lenovo 3000
Hardware Maintenance Manual
Machine Types 7812, 7813, 7814, 7815, 7816, 7817, 7818, 7819,
9680, 9681,
9682, 9683,
9684, 9685, 9686, 9687, 9688, 9689, 9690, 9691

Advertisement

Table of Contents
loading

Related Manuals for Lenovo J200

Summary of Contents for Lenovo J200

  • Page 1 Lenovo 3000 Hardware Maintenance Manual Machine Types 7812, 7813, 7814, 7815, 7816, 7817, 7818, 7819, 9680, 9681, 9682, 9683, 9684, 9685, 9686, 9687, 9688, 9689, 9690, 9691...
  • Page 3 Hardware Maintenance Manual...
  • Page 4 Portions © Copyright International Business Machines Corporation 2005. All rights reserved. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.

  • Page 5: Table Of Contents

    Advanced settings . . 54 Types 7818, 7819, 9688, 9689, 9690, and 9691 . . 134 Exiting from the Setup Utility program . . 54 Replacing the microprocessor . . 139 © Lenovo 2005, 2008. Portions © IBM Corp. 2005.
  • Page 6 Types 7816, 7817, 9686 and 9687 . . 139 Machine Type 9689 . 220 Types 7818, 7819, 9688, 9689, 9690, and 9691 . . 142 Machine Type 9690 . 227 Replacing a memory module . . 146 Machine Type 9691 .

  • Page 7: Chapter 1. About This Manual

    It is intended only for trained servicers who are familiar with Lenovo computer products. Before servicing a Lenovo product, be sure to read the Safety Information. See Chapter 2, “Safety information,” on page 3. The Symptom-to-FRU Index and Additional Service Information chapters are not specific to any machine type and are applicable to all Lenovo computers.

  • Page 8: Important Information About Replacing Rohs Compliant Frus

    FRU part numbers. Lenovo plans to transition to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo’s requirements and schedule in the EU. Products sold in 2005, will contain some RoHS compliant FRUs.

  • Page 9: Chapter 2. Safety Information

    After service, reinstall all safety shields, guards, labels, and ground wires. Replace any safety device that is worn or defective. v Reinstall all covers correctly before returning the machine to the customer. Electrical safety © Lenovo 2005, 2008. Portions © IBM Corp. 2005.
  • Page 10 CAUTION: Electrical current from power, telephone, and communication cables can be hazardous. To avoid personal injury or equipment damage, disconnect the attached power cords, telecommunication systems, networks, and modems before you open the server/workstation covers, unless instructed otherwise in the installation and configuration procedures.

  • Page 11: Voltage-Selection Switch

    v Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. v Do not touch live electrical circuits with the reflective surface of a plastic dental mirror.

  • Page 12: Handling Electrostatic Discharge-Sensitive Devices

    If any unsafe conditions are present, you must determine how serious the apparent hazard could be and whether you can continue without first correcting the problem. Consider these conditions and the safety hazards they present: v Electrical hazards, especially primary power (primary voltage on the frame can cause serious or fatal electrical shock).

  • Page 13: Grounding Requirements

    v Prevent the part from touching your clothing. Most clothing is insulative and retains a charge even when you are wearing a wrist strap. v Use the black side of a grounded work mat to provide a static-free work surface. The mat is especially useful when handling ESD-sensitive devices.
  • Page 14 v Connect to properly wired outlets any equipment that will be attached to this product. v When possible, use one hand only to connect or disconnect signal cables. v Never turn on any equipment when there is evidence of fire, water, or structural damage.
  • Page 15 CAUTION: When replacing the lithium battery, use only Part Number 33F8354 or an equivalent type battery recommended by the manufacturer. If your system has a module containing a lithium battery, replace it only with the same module type made by the same manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of.
  • Page 16 CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
  • Page 17 Chapter 2. Safety information...
  • Page 18 Hardware Maintenance Manual...
  • Page 19 ≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) Chapter 2. Safety information...
  • Page 20 PERIGO A corrente elétrica proveniente de cabos de alimentação, de telefone e de comunicações é perigosa. Para evitar risco de choque elétrico: v Não conecte nem desconecte nenhum cabo ou execute instalação, manutenção ou reconfiguração deste produto durante uma tempestade com raios. v Conecte todos os cabos de alimentação a tomadas elétricas corretamente instaladas e aterradas.
  • Page 21 CUIDADO: Ao substituir a bateria de lítio, utilize apenas uma bateria com Número de Peça 33F8354 ou um tipo de bateria equivalente recomendado pelo Se o seu sistema possui um módulo com uma bateria de lítio, substitua-o apenas por um módulo do mesmo tipo e do mesmo fabricante.
  • Page 22 CUIDADO: O botão de controle de alimentação do dispositivo e o botão para ligar/desligar da fonte de alimentação não desligam a corrente elétrica fornecida ao dispositivo. O dispositivo também pode ter mais de um cabo de alimentação. Para remover toda a corrente elétrica do dispositivo, assegure que todos os cabos de alimentação estejam desconectados da fonte de alimentação.
  • Page 23 Chapter 2. Safety information...
  • Page 24 Hardware Maintenance Manual...
  • Page 25 Chapter 2. Safety information...
  • Page 26 Hardware Maintenance Manual...
  • Page 27 DANGER Le courant électrique provenant de l’alimentation, du téléphone et des câbles de transmission peut présenter un danger. Pour éviter tout risque de choc électrique : v Ne manipulez aucun câble et n’effectuez aucune opération d’installation, d’entretien ou de reconfiguration de ce produit au cours d’un orage. v Branchez tous les cordons d’alimentation sur un socle de prise de courant correctement câblé...
  • Page 28 ATTENTION: Remplacer la pile au lithium usagée par une pile de référence identique exclusivement, (référence 33F8354), ou suivre les instructions du fabricant qui en définit les équivalences. Si votre système est doté d’un module contenant une pile au lithium, vous devez le remplacer uniquement par un module identique, produit par le même fabricant.
  • Page 29 ≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) ATTENTION: Soulevez la machine avec précaution. ATTENTION: L’interrupteur de contrôle d’alimentation de l’unité et l’interrupteur dubloc d’alimentation ne coupent pas le courant électrique alimentantl’unité. En outre, le système peut être équipé de plusieurs cordonsd’alimentation. Pour mettre l’unité...
  • Page 30 VORSICHT An Netz-, Telefon- und Datenleitungen können gefährliche Spannungen anliegen. Aus Sicherheitsgründen: v Bei Gewitter an diesem Gerät keine Kabel anschließen oder lösen. Ferner keine Installations-, Wartungs- oder Rekonfigurationsarbeiten durchführen. v Gerät nur an eine Schutzkontaktsteckdose mit ordnungsgemäß geerdetem Schutzkontakt anschließen. v Alle angeschlossenen Geräte ebenfalls an Schutzkontaktsteckdosen mit ordnungsgemäß...
  • Page 31 CAUTION: Eine verbrauchte Lithiumbatterie nur durch eine Batterie mit der Teilenummer 33F8354 oder eine gleichwertige, vom Hersteller empfohlene Batterie ersetzen. Enthält das System ein Modul mit einer Lithiumbatterie, dieses nur durch ein Modul desselben Typs und von demselben Hersteller ersetzen. Die Batterie enthält Lithium und kann bei unsachgemäßer Verwendung, Handhabung oder Entsorgung explodieren.
  • Page 32 ≥18 kg ≥32 kg ≥55 kg ACHTUNG: Arbeitsschutzrichtlinien beim Anheben der Maschine beachten. ACHTUNG: Mit dem Netzschalter an der Einheit und am Netzteil wird die Stromversorgung für die Einheit nicht unterbrochen. Die Einheit kann auch mit mehreren Netzkabeln ausgestattet sein. Um die Stromversorgung für die Einheit vollständig zu unterbrechen, müssen alle zum Gerät führenden Netzkabel vom Netz getrennt werden.
  • Page 33 Chapter 2. Safety information...
  • Page 34 Hardware Maintenance Manual...
  • Page 35 Chapter 2. Safety information...
  • Page 36 PERICOLO La corrente elettrica proveniente dai cavi di alimentazione, del telefono e di comunicazione può essere pericolosa. Per evitare il rischio di scosse elettriche: v Non collegare o scollegare qualsiasi cavo oppure effettuare l’installazione, la manutenzione o la riconfigurazione del prodotto durante un temporale. v Collegare tutti i fili elettrici a una presa di alimentazione correttamente cablata e dotata di messa a terra.
  • Page 37 ATTENZIONE: Quando si sostituisce la batteria al litio, utilizzare solo il Numero parte 33F8354 o un tipo di batteria equivalente consigliato dal produttore. Se sul sistema è presente un modulo che contiene una batteria al litio, sostituirlo solo con un tipo di modulo dello stesso tipo della stessa casa di produzione.
  • Page 38 ≥18 kg ≥32 kg ≥55 kg ATTENZIONE: Prestare attenzione nel sollevare l’apparecchiatura. ATTENZIONE: Il pulsante di controllo dell’alimentazione presente sull’unità e l’interruttore dell’alimentatore non disattivano l’alimentazione corrente fornita all’unità. E’ possibile che l’unità disponga di più cavi di alimentazione. Per disattivare l’alimentazione dall’unità, accertarsi che tutti i cavi di alimentazione siano scollegati dalla fonte di alimentazione.
  • Page 39 Chapter 2. Safety information...
  • Page 40 Hardware Maintenance Manual...
  • Page 41 PELIGRO La corriente eléctrica procedente de cables de alimentación, teléfonos y cables de comunicación puede ser peligrosa. Para evitar el riesgo de descarga eléctrica: v No conecte ni desconecte los cables ni realice ninguna tarea de instalación, mantenimiento o reconfiguración de este producto durante una tormenta eléctrica.
  • Page 42 PRECAUCIÓN: Cuando sustituya una batería de litio, utilice solamente una batería número de pieza 33F8354 u otra de tipo equivalente recomendada por el fabricante. Si su sistema dispone de un módulo que contiene una batería de litio, reemplácelo sólo con el mismo tipo de módulo, del mismo fabricante. La batería contiene litio y puede explotar si no se utiliza, manipula o desecha correctamente.
  • Page 43 ≥18 kg ≥32 kg ≥55 kg PRECAUCIÓN: Adopte procedimientos seguros al levantar el equipo. PRECAUCIÓN: El botón de control de alimentación del dispositivo y el interruptor de alimentación de la fuente de alimentación no desconectan la corriente eléctrica suministrada al dispositivo. Además, el dispositivo podría tener más de un cable de alimentación.
  • Page 44 Hardware Maintenance Manual...

  • Page 45: Chapter 3. General Information

    – Notification of new versions of tools and device drivers – Useful hints and tips ® To access the Lenovo Care program, open the Start menu from the Windows desktop, select All Programs, select Lenovo Care, and click Lenovo Care. Additional information resources If you have Internet access, the most up-to-date information for your computer is available from the World Wide Web.

  • Page 46: Specifications

    Specifications This section lists the physical specifications for your computer. Types 7812, 7813, 7814, 7815, 9680, 9681, 9682, 9683, 9684, and 9685 This section lists the physical specifications for your computer. Dimensions Width: 331 mm (13.03 in.) Height: 105 mm (4.13 in.) Depth: 405 mm (15.94 in.) Weight Minimum configuration as shipped: 8.2 kg (18 lbs)

  • Page 47: Types 7816, 7817, 7818, 7819, 9686, 9687, 9688, 9689, 9690, And 9691

    Types 7816, 7817, 7818, 7819, 9686, 9687, 9688, 9689, 9690, and 9691 This section lists the physical specifications. Dimensions Height: 410 mm (16.14 in.) Width: 175 mm (6.9 in.) Depth: 424 mm (16.7 in.) Weight Minimum configuration: 8.17 kg (18 lb) Maximum configuration: 10.21 kg (22.5 lb) Environment Air temperature:...
  • Page 48 Hardware Maintenance Manual...

  • Page 49: Chapter 4. General Checkout

    If possible, have this information available when requesting assistance from Service Support and Engineering functions. v Machine type and model v Processor or hard disk upgrades v Failure symptom – Do diagnostics indicate a failure? © Lenovo 2005, 2008. Portions © IBM Corp. 2005.
  • Page 50 – What, when, where, single, or multiple systems? – Is the failure repeatable? – Has this configuration ever worked? – If it has been working, what changes were made prior to it failing? – Is this the original reported failure? v Diagnostics version –...

  • Page 51: Chapter 5. Diagnostics

    PC-Doctor for Windows is a diagnostic program that works through the Windows operating system. The PC-Doctor for Windows diagnostic program enables you to view symptoms and solutions for computer problems, access the Lenovo troubleshooting center, update system drivers, and review system information.

  • Page 52: Pc-Doctor For Dos

    To create a diagnostic CD image, download a self-starting bootable CD image (known as an .iso image) of the diagnostic program from http:// www.lenovo.com/support/. After you download the image, you can create the CD using any CD burning software. If the computer does not have a CD burner or you do not have Internet access, see “Creating diagnostic diskettes.”...

  • Page 53: Running Diagnostics From The Cd Or Diskettes

    7. When prompted, insert a blank, formatted diskette into the diskette drive and continue to follow the instructions on the screen. 8. When the operation is complete, remove the diskette and click Quit. 9. Insert another blank, formatted diskette into the diskette drive and continue to follow the instructions on the screen.
  • Page 54 Test results (N/A, PASSED, FAILED, ABORTED) are displayed in the field beside the test description and in the test log. See “Viewing the test log” on page 49. To select one or more tests, use the following procedure. 1. Open the corresponding test category. 2.

  • Page 55: Viewing The Test Log

    The Full Erase Hard Drive provides a DOS utility that performs the following: v Performs all the steps in Quick Erase. v Provides a DOS utility that writes random data to all sectors of the hard drive. v Provides an estimate of time to completion along with a visual representation of completion status.
  • Page 56 Hardware Maintenance Manual...

  • Page 57: Chapter 6. Using The Setup Utility

    For security reasons, it is a good idea to use a strong password that cannot be easily compromised. Passwords should adhere to the following rules: v Have at least eight characters in length © Lenovo 2005, 2008. Portions © IBM Corp. 2005.

  • Page 58: User Password

    v Contain at least one alphabetic character, one numeric character, and one symbol v Contain at least one of the following symbols: , . / ` ; ' [] v You can also use the space bar v Setup Utility program and hard disk drive passwords are not case sensitive v Not be your name or your user name v Not be a common word or a common name v Be significantly different from your previous password...

  • Page 59: Selecting A Startup Device

    3. Select Security Profile by Device. 4. Select the desired devices and settings and press Enter. 5. Return to the Setup Utility program menu and select Exit and then Save Settings or Save and exit the Setup Utility. Note: If you do not want to save the settings, select Exit the Setup Utility without saving.

  • Page 60: Advanced Settings

    Advanced settings On some computer models the Advanced settings menu includes a setting to Enable/Disable HyperThreading. This feature works only with ® HyperThreading-aware operating systems, such as Microsoft Windows XP and ® Windows Vista . The default setting for HyperThreading is Enabled. However, if you select Set Defaults and are using an operating system other than Windows XP or Windows Vista, your computer performance might be degraded.

  • Page 61: Lenovo 2005, 2008. Portions © Ibm Corp

    On/Off Switch Power Supply connector v System Board Power Supply connectors v Microprocessor(s) connection Check the power cord for continuity. Power Cord Check the power-on switch for continuity. Power-on Switch © Lenovo 2005, 2008. Portions © IBM Corp. 2005.

  • Page 62: Diagnostic Error Codes

    Diagnostic error codes Refer to the following diagnostic error codes when using the diagnostic tests. See “Running tests” on page 47 for the specific type for information about the Diagnostic programs. In the following index, X can represent any number. Diagnostic Error Code FRU/Action 000-000-XXX...
  • Page 63 Diagnostic Error Code FRU/Action 000-196-XXX 1. Press F3 to review the log file BIOS test halt, error threshold exceeded 2. Re-start the test to reset the log file 000-197-XXX 1. Make sure the component that is called BIOS test warning out is connected and/or enabled.
  • Page 64 Diagnostic Error Code FRU/Action 001-032-XXX System board System Device Controller failure 001-034-XXX 1. Reboot the system System Device Buffer Allocation failure 2. Flash the system. See “Flash update procedures” on page 243 3. Run memory test 4. System board 001-035-XXX System board System Device Reset condition detected 001-036-XXX...
  • Page 65 Diagnostic Error Code FRU/Action 001-254-XXX System board 001-255-XXX 001-256-XXX 001-257-XXX System DMA error 001-260-XXX System board 001-264-XXX System IRQ error 001-268-XXX 1. Device on IRQ1 System IRQ1 failure 2. System board 001-269-XXX 1. Device on IRQ2 System IRQ2 failure 2. System board 001-270-XXX 1.
  • Page 66 Diagnostic Error Code FRU/Action 001-286-XXX System board 001-287-XXX 001-288-XXX System Timer failure 001-292-XXX 1. Run Setup and re-test System CMOS 2. System board RAM error 001-293-XXX 1. CMOS Battery System CMOS Battery 2. System board 001-298-XXX 1. Flash the system. See “Flash update System RTC date/time update failure procedures”...
  • Page 67 Diagnostic Error Code FRU/Action 005-036-XXX 1. Video card, if installed Video Register error 2. System board 005-038-XXX 1. Video card, if installed System BIOS extension failure 2. System board 005-040-XXX 1. Video card, if installed Video IRQ failure 2. System board 005-195-XXX Information only Video Test aborted by user...
  • Page 68 Diagnostic Error Code FRU/Action 006-197-XXX 1. If a component is called out, make sure Diskette interface test warning it is connected and/or enabled 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 006-198-XXX 1.
  • Page 69 Diagnostic Error Code FRU/Action 011-197-XXX 1. Make sure the component that is called Serial port test warning out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 51 2. Re-run test 3. Replace the component that is called out in warning statement 4.
  • Page 70 Diagnostic Error Code FRU/Action 014-196-XXX 1. Press F3 to review the log file Parallel port test halt, error threshold 2. Re-start the test to reset the log file exceeded 014-197-XXX 1. Make sure the component that is called Parallel port test warning out is connected and/or enabled.
  • Page 71 Diagnostic Error Code FRU/Action 015-036-XXX System board USB port Register error 015-040-XXX 1. Run setup and check for conflicts USB port IRQ failure 2. Flash the system. See “Flash update procedures” on page 243 3. System board 015-195-XXX Information only USB port Test aborted by user Re-start the test, if necessary 015-196-XXX...
  • Page 72 Diagnostic Error Code FRU/Action 018-197-XXX 1. Make sure the component that is called PCI Card test warning out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 51 2. Re-run test 3. Replace the component that is called out in warning statement 4.
  • Page 73 Diagnostic Error Code FRU/Action 020-198-XXX 1. If a component is called out, make sure PCI test aborted it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 51 2. Flash the system and re-test. See “Flash update procedures”...
  • Page 74 Diagnostic Error Code FRU/Action 025-198-XXX 1. If a component is called out, make sure IDE interface test aborted it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 51 2. Flash the system and re-test. See “Flash update procedures”...
  • Page 75 Diagnostic Error Code FRU/Action 030-198-XXX 1. If a component is called out, make sure SCSI interface test aborted it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 51 2. Flash the system and re-test. See “Flash update procedures”...
  • Page 76 Diagnostic Error Code FRU/Action 071-00X-XXX 1. Run Setup 071-01X-XXX 2. Flash the system. See “Flash update 071-02X-XXX procedures” on page 243 Audio port error 3. System board 071-03X-XXX 1. Speakers Audio port failure 2. Microphone 3. Audio card, if installed 4.
  • Page 77 Diagnostic Error Code FRU/Action 080-196-XXX 1. Press F3 to review the log file Game Port interface test halt, error threshold 2. Re-start the test to reset the log file exceeded 080-197-XXX 1. Make sure the component that is called Game Port interface test warning out is connected and/or enabled.
  • Page 78 Diagnostic Error Code FRU/Action 086-197-XXX 1. Make sure the component that is called Mouse Port interface test warning out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 51 2. Re-run test 3. Replace the component that is called out in warning statement 4.
  • Page 79 Diagnostic Error Code FRU/Action 170-0XX-XXX 1. Flash system Voltage Sensor(s) failure 2. System board 170-195-XXX Information only Voltage Sensor(s) Test aborted by user Re-start the test, if necessary 170-196-XXX 1. Press F3 to review the log file Voltage Sensor(s) test halt, error threshold 2.
  • Page 80 Diagnostic Error Code FRU/Action 175-197-XXX 1. Make sure the component that is called Thermal Sensor(s) test warning out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 51 2. Re-run test 3. Replace the component that is called out in warning statement 4.
  • Page 81 Diagnostic Error Code FRU/Action 215-000-XXX No action CD-ROM Drive Test Passed 215-XXX-XXX 1. CD-ROM Drive Cable CD-ROM Drive error 2. Check power supply voltages 3. CD-ROM drive 4. System board 217-000-XXX No action Hard Disk Drive Test Passed 217-25X-XXX 1. Hard Disk Drive Cable 217-26X-XXX 2.
  • Page 82 Diagnostic Error Code FRU/Action 415-000-XXX No action Modem Test Passed 415-XXX-XXX Remove the Modem and re-test the system Modem error Hardware Maintenance Manual...

  • Page 83: Beep Symptoms

    Beep symptoms Beep symptoms are tones or a series of tones separated by pauses (intervals without sound) during POST. The following tables describes beep symptoms. Beep Symptom FRU/Action 2 short beeps Perform the following actions in order. CMOS setting error 1.

  • Page 84: Post Error Codes

    POST error codes Each time you power-on the system, it performs a series of tests that check the operation of the system and some options. This series of tests is called the Power-On Self-Test, or POST. POST does the following operations. v Checks some basic system-board operations v Checks the memory operation v Starts the video operation...
  • Page 85 POST Error Message Description/Action Press TAB to show POST screen Pressing the TAB key permits the user to toggle between the default POST display screen and a custom POST display screen. Error: Non-System disk or disk error The BIOS was unable to find a suitable boot Replace and press any key when ready device.

  • Page 86: Miscellaneous Error Messages

    Miscellaneous error messages Message/Symptom FRU/Action Changing display colors Display/Monitor Computer will not power-off. See “Power 1. Power Switch Supply Problems” on page 55. 2. System Board 3. Riser card, if installed Computer will not RPL from server 1. Ensure that network is in startup sequence as first device or first device after diskette 2.

  • Page 87: Undetermined Problems

    Message/Symptom FRU/Action Non-system disk or disk error-type message 1. Diskette Drive with a known-good diagnostic diskette. 2. System Board 3. Diskette Drive Cable Other display symptoms not listed above 1. Display (including blank or illegible display) 2. System Board Power-on indicator or hard disk drive in-use 1.
  • Page 88 c. Memory modules d. Extended video memory e. External Cache f. External Cache RAM g. Hard disk drive h. Diskette drive 3. Power-on the computer to re-test the system. 4. Repeat steps 1 through 3 until you find the failing device or adapter. If all devices and adapters have been removed, and the problem continues, replace the system board.

  • Page 89: Chapter 8. Replacing Frus (Types 7812, 7813, 7814, 7815, 9680, 9681, 9682, 9683, 9684, And 9685)

    These precautions and guidelines will help you work safely. FRU replacements are to be done by trained service technicians only. This chapter does not contain a remove and replace procedure for all FRUs. Only the major FRUs are documented. © Lenovo 2005, 2008. Portions © IBM Corp. 2005.

  • Page 90: Rear Connectors

    Rear connectors The following illustration shows the locations of the connectors on the rear of the computer. Standard mouse connector PCI Express 1x adapter or PCI Express x16 graphics adapter connector Parallel connector C/LFE connector (some models) Ethernet connector SPDIF connector (some models) Audio line in connector Audio line out connector Back surround connector (some...

  • Page 91: Removing The Cover

    Removing the cover Important Read Chapter 2, “Safety information,” on page 3 and “Handling electrostatic discharge-sensitive devices” on page 6 before opening the cover. This procedure describes how to remove the cover. 1. Remove any media (diskettes, CDs, or tapes) from the drives, shut down the operating system, and turn off all attached devices.

  • Page 92: Locations

    Locations The following illustration will help you locate the major FRUs in the computer. Fan plenum, fan, and heat sink Memory modules Microprocessor Power supply Optical drive PCI adapter or PCI Express x1 adapter connector Hard disk drive PCI Express x16 graphics adapter or PCI Express x1 adapter connector Diskette drive PCI Express x1 adapter or PCI...

  • Page 93: Locating Parts On The System Board

    Locating parts on the system board The machine types supported by this maintenance manual include several different system boards. Locate the appropriate machine type in one of the following sections. Machine types 7812, 7813, 9680 and 9681 Microprocessor fan connector Front USB connectors (2) Microprocessor and heat sink Battery...

  • Page 94: Machine Types 7814, 7815, 9682 And 9683

    Machine types 7814, 7815, 9682 and 9683 Microprocessor and heat sink Front panel connector Microprocessor fan connector Power fan connector Memory connector 1 Front USB connectors (2) Memory connector 2 Serial (COM) connector Memory connector 3 Front audio connector Memory connector 4 PCI adapter connector Power connector PCI Express x1 adapter connectors...

  • Page 95: Machine Types 9684 And 9685

    Machine types 9684 and 9685 Microprocessor and heat sink Front USB connectors (2) Microprocessor fan connector Serial (COM) connector Memory connector 1 Leo connector Memory connector 2 CD-IN connector Power connector Front audio connector Diskette drive connector PCI adapter connectors (2) IDE connector PCI Express x1 adapter connector Clear CMOS/Recovery jumpers...

  • Page 96: Accessing System Board Components And Drives

    Accessing system board components and drives You might need to remove the drive bay assembly to access system board components such as memory, the battery, and CMOS. To access system board components and the drives: 1. Remove the computer cover. See “Removing the cover” on page 85. 2.
  • Page 97 4. Using the blue handle 1 , lift and slide the drive bay assembly forward until the locating studs in the drive bay assembly are aligned with the slots on the sides of the chassis. Pull upward on the handle to remove the drive bay assembly completely from the chassis.

  • Page 98: Replacing A Memory Module

    Replacing a memory module This procedure describes how to remove and replace a memory module. Installing memory This computer either has two or four connectors for installing double data rate 2 dual inline memory modules (DDR2 DIMMs). System boards with two connectors can accommodate a maximum of 2.0 GB of system memory.
  • Page 99 5. Slide the drive bay assembly towards the rear of the chassis until it snaps into position. 6. Reinstall the front bezel. 7. Go to “Completing the FRU replacement” on page 120. Chapter 8. Replacing FRUs - Desktop computers...

  • Page 100: Replacing The Cmos Battery

    Replacing the CMOS battery If the CMOS battery fails, the date, time, and configuration information (including passwords) are lost. An error message is displayed when you turn on the computer. Important Refer to “Safety notices (multi-lingual translations)” on page 7 for information about replacing and disposing of the battery.

  • Page 101: Replacing The Power Supply

    Replacing the power supply Attention Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no servicable parts inside these components.
  • Page 102 7. Lift the power supply out of the chassis. 8. If the power supply has a voltage-selection switch, ensure that it is set to match the voltage available at the electrical outlet. v If the voltage supply range in your local country or region is 100-127 V ac, set the switch to 115 V.

  • Page 103: Replacing The System Board

    Replacing the system board This procedure describes how to remove and replace a memory module. The procedure varies depending upon the machine type. Types 7812, 7813, 9680, and 9681 Important The heat sink and microprocessor might be very hot. Make sure these components are cool enough to safely handle before continuing this procedure.
  • Page 104 12. Lift the heat sink and fan assembly off the failing system board. Place the heat sink on its side so that the thermal grease does not come in contact with anything. Note: You might have to gently twist the heat sink to free it from the microprocessor.
  • Page 105 c. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible. 16. Holding the microprocessor with your fingers, position the microprocessor so that the small triangle 1 is aligned with the corresponding triangle on the socket in the new system board.
  • Page 106 Types 7814, 7815, 9682, 9683, 9684, and 9685 Important The heat sink and microprocessor might be very hot. Make sure these components are cool enough to safely handle before continuing this procedure. Note: When replacing the system board you must also order a new retention module for the new system board.
  • Page 107 Note: You might have to gently twist the heat sink to free it from the microprocessor. 13. To remove the microprocessor 2 from the system board, lift the small handle 3 and open the retainer 1 . Important Touch only the sides of the microprocessor. Do not touch the gold contacts on the bottom.
  • Page 108 Notes: a. Notice the orientation of the notches 1 on the microprocessor. This is important when reinstalling the microprocessor on the new system board. b. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible. 15.
  • Page 109 21. Reconnect the heat sink and fan assembly cable to the system board. See the system board illustration for your machine type at “Locating parts on the system board” on page 87. 22. Install the new system board into the chassis and align the screw holes with those in the chassis.

  • Page 110: Types 7814, 7815, 9682, 9683, 9684, And 9685

    Replacing the microprocessor This procedure describes how to remove and replace the power supply. The procedure varies depending upon the machine type. Types 7812, 7813, 9680 and 9681 Important The heat sink and microprocessor might be very hot. Make sure these components are cool enough to safely handle before continuing this procedure.
  • Page 111 7. Lift the microprocessor straight up and out of the socket. Notes: a. Your microprocessor and socket might look different than the one illustrated. b. Note the orientation of the microprocessor in the socket. Look for the small triangle on one corner of the microprocessor. This is important when reinstalling the microprocessor on the system board.
  • Page 112 10. Holding the microprocessor with your fingers, position the microprocessor so that the triangle 1 is aligned with the corresponding triangle on the socket. 11. Lower the microprocessor straight down into the socket. Note: Install the black protective cover that was removed from the new microprocessor onto the defective microprocessor after the installation is complete.
  • Page 113 16. Go to “Completing the FRU replacement” on page 120. Chapter 8. Replacing FRUs - Desktop computers...

  • Page 114: Types 7814, 7815, 9682, 9683, 9684, And 9685

    Types 7814, 7815, 9682, 9683, 9684, and 9685 Important The heat sink and microprocessor might be very hot. Make sure these components are cool enough to safely handle before continuing this procedure. 1. Remove the cover. See “Removing the cover” on page 85. 2.
  • Page 115 6. To remove the microprocessor 2 from the system board, lift the small handle 3 and open the retainer 1 . Important Touch only the sides of the microprocessor. Do not touch the gold contacts on the bottom. 7. Lift the microprocessor straight up and out of the socket. Chapter 8.
  • Page 116 Notes: a. Note the orientation of the notches 1 on the microprocessor. This is important when reinstalling the microprocessor on the system board. b. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible. 8.
  • Page 117 13. Install the heat sink and fan assembly on the system board. 14. Connect the heat sink and fan assembly cable to the system board. See the system board illustration for your machine type at “Locating parts on the system board” on page 87. 15.

  • Page 118: Replacing The Hard Disk Drive

    Replacing the hard disk drive Important When a new hard disk drive is installed, a set of Product Recovery discs might be required. The set of Product Recovery discs enable the contents of the hard disk to be restored to the same state as when the computer was originally shipped from the factory.
  • Page 119 6. Install the new drive into the blue bracket, flex the bracket, and align the pins 1 through 4 on the bracket with the holes in the hard disk drive. Do not touch the circuit board 5 on the bottom of the hard disk drive. 7.

  • Page 120: Replacing An Optical Drive

    Replacing an optical drive This procedure describes how to remove and replace an optical drive. 1. Remove the cover. See “Removing the cover” on page 85. 2. Remove the drive bay assembly. See “Accessing system board components and drives” on page 90. 3.

  • Page 121: Replacing The Diskette Drive

    Replacing the diskette drive This procedure describes how to remove and replace a diskette drive. 1. Remove the cover. See “Removing the cover” on page 85. 2. Remove the drive bay assembly. See “Accessing system board components and drives” on page 90. 3.

  • Page 122: Replacing The Power Switch/Led Assembly

    Replacing the power switch/LED assembly This procedure describes how to remove and replace the power switch/LED assembly. 1. Remove cover. See “Removing the cover” on page 85. 2. Remove the drive bay assembly. See “Accessing system board components and drives” on page 90. 3.

  • Page 123: Replacing The Front Panel Card

    Replacing the front panel card This procedure describes how to remove and replace the front panel card. 1. Remove cover. See “Removing the cover” on page 85. 2. Remove the drive bay assembly. See “Accessing system board components and drives” on page 90. 3.
  • Page 124 6. Remove the system fan assembly by pulling the bracket outward and lifting it up from the system board to remove completely. 7. Install the new system fan assembly and install the two screws that secure the fan assembly. 8. Connect the system fan cable to the system fan connector on the system board.

  • Page 125: Replacing A Pci Adapter

    Replacing a PCI adapter This procedure describes how to remove and replace a PCI adapter. 1. Remove cover. See “Removing the cover” on page 85. 2. Open the adapter latch and remove the failing adapter. 3. Remove the new adapter from its static-protective package. 4.

  • Page 126: Completing The Fru Replacement

    Completing the FRU replacement After replacing FRUs, you need to install any removed parts, replace the cover, and reconnect any cables, including telephone lines and power cords. Also, depending on the FRU that is replaced, you might need to confirm the updated information in the Setup Utility program.

  • Page 127: Chapter 9. Replacing Frus (Types 7816, 7817, 7818, 7819, 9686, 9687, 9688, 9689, 9690, And 9691)

    These precautions and guidelines will help you work safely. FRU replacements are to be done by trained service technicians only. This chapter does not contain a remove and replace procedure for all FRUs. Only the major FRUs are documented. © Lenovo 2005, 2008. Portions © IBM Corp. 2005.

  • Page 128: Rear Connectors

    Rear connectors The following illustration shows the locations of the connectors on the rear of the computer. 1 Voltage selection switch (some models) 11 Microphone connector 2 Power connector 12 Audio line out connector 3 Mouse connector 13 Audio line in connector 4 Keyboard connector 14 SPDIF connector (some models) 5 Serial connector...

  • Page 129: Removing The Cover

    Removing the cover Important Read Chapter 2, “Safety information,” on page 3 and “Handling electrostatic discharge-sensitive devices” on page 6 before opening the cover. This procedure describes how to remove the cover. 1. Shut down the operating system, remove any media (DVDs, CDs, or tapes) from the drives, and turn off all attached devices.

  • Page 130: Locations

    Locations The following illustration will help you locate the major FRUs in the computer. 1 Heat sink and fan 8 Internal speaker assembly 2 Microprocessor 9 Front audio/USB assembly 3 Memory modules 10 Hard disk drive 4 Optical drive 11 System board 5 Diskette drive 12 System fan 6 Bezel...

  • Page 131: Locating Parts On The System Board

    Locating parts on the system board The machine types supported by this maintenance manual include several different system boards. Locate the appropriate machine type in one of the following sections. Machine types 7816, 7817, 9686 and 9687 Microprocessor fan connector Front USB connectors (2) Microprocessor and heat sink Battery...

  • Page 132: Machine Types 7818, 7819, 9688 And 9689

    Machine types 7818, 7819, 9688 and 9689 Microprocessor and heat sink Front panel connector Microprocessor fan connector Power fan connector Memory connector 1 Front USB connectors (2) Memory connector 2 Serial (COM) connector Memory connector 3 Front audio connector Memory connector 4 PCI adapter connector Power connector PCI Express x1 adapter connectors...

  • Page 133: Machine Types 9690 And 9691

    Machine types 9690 and 9691 Microprocessor and heat sink Front USB connectors (2) Microprocessor fan connector Serial (COM) connector Memory connector 1 Leo connector Memory connector 2 CD-IN connector Power connector Front audio connector Diskette drive connector PCI adapter connectors (2) IDE connector PCI Express x1 adapter connector Clear CMOS/Recovery jumpers...

  • Page 134: Removing And Replacing The Front Bezel

    Removing and replacing the front bezel This procedure describes how to remove and replace the front bezel. 1. Remove the computer cover. See “Removing the cover” on page 123. 2. Remove the front bezel by releasing the three plastic tabs inside the chassis and pivoting the bezel outward.

  • Page 135: Replacing The Power Supply

    7. Install the four screws to secure the power supply. Note: Use only the screws provided by Lenovo. 8. Reconnect the power supply connectors to the system board. See “Locating parts on the system board” on page 125.

  • Page 136: Replacing The System Board

    Replacing the system board This procedure describes how to remove and replace the system board. The procedure varies depending upon the machine type. Types 7816, 7817, 9686 and 9687 Important The heat sink and microprocessor might be very hot. Make sure these components are cool enough to safely handle before continuing this procedure.
  • Page 137 11. Rotate handle 1 to release the heat sink clamp and then disengage the clamp from the plastic retention bracket. 12. Lift the heat sink and fan assembly off the failing system board. Place the heat sink on its side so that the thermal grease does not come in contact with anything.
  • Page 138 Important Touch only the sides of the microprocessor. Do not touch the gold contacts on the bottom. 15. Lift the microprocessor straight up and out of the socket. Notes: a. Your microprocessor and socket might look different than the one illustrated.
  • Page 139 18. Lower the microprocessor straight down into the system board socket of the new system board. 19. Lower the small handle to secure the microprocessor in the socket. 20. Connect the heat sink and fan assembly cable to the system board. See the system board illustration for your machine type at “Locating parts on the system board”...
  • Page 140 Types 7818, 7819, 9688, 9689, 9690, and 9691 Important The heat sink and microprocessor might be very hot. Make sure these components are cool enough to safely handle before continuing this procedure. Note: When replacing the system board you must also order a new retention module for the new system board.
  • Page 141 12. Lift the heat sink and fan assembly off the failing system board. Place the heat sink on its side so that the thermal grease does not come in contact with anything. Chapter 9. Replacing FRUs - Tower Computers...
  • Page 142 13. To remove the microprocessor 2 from the system board, lift the small handle 3 and open the retainer 1 . Important Touch only the sides of the microprocessor. Do not touch the gold contacts on the bottom. 14. Lift the microprocessor straight up and out of the socket. Hardware Maintenance Manual...
  • Page 143 Notes: a. Note the orientation of the notches 1 on the microprocessor. This is important when reinstalling the microprocessor on the new system board. b. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible. 15.
  • Page 144 21. Connect the heat sink and fan assembly cable to the new system board. See the system board illustration for your machine type at “Locating parts on the system board” on page 125. 22. Install the new system board into the chassis and align the screw holes with those in the chassis.

  • Page 145: Types 7818, 7819, 9688, 9689, 9690, And 9691

    Replacing the microprocessor This procedure describes how to remove and replace the microprocessor. The procedure varies depending upon the machine type. Types 7816, 7817, 9686 and 9687 Important The heat sink and microprocessor might be very hot. Make sure these components are cool enough to safely handle before continuing this procedure.
  • Page 146 6. To release the microprocessor 2 from the system board socket, lift the small handle 1 . Important Do not touch the gold contacts on the bottom of the microprocessor. If you must touch the microprocessor, touch only the sides. 7.
  • Page 147 8. Make sure that the small handle is in the raised position. 9. Holding the microprocessor with your fingers, position the microprocessor so that the small triangle on one corner is aligned with the corresponding triangle on the microprocessor socket. 10.

  • Page 148: Types 7818, 7819, 9688, 9689, 9690, And 9691

    Types 7818, 7819, 9688, 9689, 9690, and 9691 Important The heat sink and microprocessor might be very hot. Make sure these components are cool enough to safely handle before continuing this procedure. 1. Remove the side cover. See “Removing the cover” on page 123. 2.
  • Page 149 6. To remove the microprocessor 2 from the system board, lift the small handle 3 and open the retainer 1 . Important Touch only the sides of the microprocessor. Do not touch the gold contacts on the bottom. 7. Lift the microprocessor straight up and out of the socket. Chapter 9.
  • Page 150 Notes: a. Note the orientation of the notches 1 on the microprocessor. This is important when reinstalling the microprocessor on the new system board. b. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible. 8.
  • Page 151 11. Lower the microprocessor straight down into the system board socket of the system board. 12. To secure the microprocessor in the socket, close the microprocessor retainer and lock it into position with the small handle. 13. Install the heat sink and fan assembly on the system board. 14.

  • Page 152: Replacing A Memory Module

    Replacing a memory module This procedure describes how to remove and replace a memory module. Installing memory This computer either has two or four connectors for installing double data rate 2 dual inline memory modules (DDR2 DIMMs). System boards with two connectors can accommodate a maximum of 2.0 GB of system memory.
  • Page 153 the retaining clips close. 5. Go to “Completing the FRU replacement” on page 161. Chapter 9. Replacing FRUs - Tower Computers...

  • Page 154: Replacing A Pci Adapter

    Replacing a PCI adapter This procedure describes how to remove and replace a PCI adapter. 1. Remove the computer cover. See “Removing the cover” on page 123. 2. At the rear of the computer, press the release button 1 to open the adapter latch 2 and remove the adapter by pulling it straight out of the adapter connector.
  • Page 155 3. Install the new adapter into the same adapter connector. 4. Ensure the adapter is fully seated into the adapter connector. 5. At the rear of the computer, pivot the adapter latch to the closed position to secure the adapter. 6.

  • Page 156: Replacing The Hard Disk Drive

    Replacing the hard disk drive Important When a new hard disk drive is installed, a set of Product Recovery discs might be required. The set of Product Recovery discs enable the contents of the hard disk to be restored to the same state as when the computer was originally shipped from the factory.
  • Page 157 7. To install the new drive into the blue bracket, flex the bracket, and align the pins 1 through 4 on the bracket with the holes in the hard disk drive. Do not touch the circuit board 5 on the bottom of the hard disk drive. 8.
  • Page 158 9. Align the drive cage pivot pin with the slot 1 in the upper drive cage and slide the hard disk drive into the chassis. 10. Press down on the metal latch 2 and pivot in the drive cage into place. Slide it forward until it snaps into position.

  • Page 159: Replacing An Optical Drive

    Replacing an optical drive This procedure describes how to remove and replace an optical drive. 1. Remove the computer cover. See “Removing the cover” on page 123. 2. Remove the front bezel. See “Removing and replacing the front bezel” on page 128.

  • Page 160: Replacing The Diskette Drive

    Replacing the diskette drive This procedure describes how to remove and replace the diskette drive. 1. Remove the computer cover. See “Removing the cover” on page 123. 2. Remove the front bezel. See “Removing and replacing the front bezel” on page 128.

  • Page 161: Replacing The Rear Fan Assembly

    Replacing the rear fan assembly This procedure describes how to remove and replace the system fan. 1. Remove the computer cover. See “Removing the cover” on page 123. 2. Note the routing of the rear fan cable to the system board. Disconnect the rear fan cable from the system fan connector on the system board.
  • Page 162 4. Install the new rear fan assembly by aligning the rubber mounts of the system fan assembly with the holes on the chassis and push the rubber mounts through the holes. 5. Pull on the tips of the rubber mounts until the fan assembly is in place. 6.

  • Page 163: Replacing The Front Fan Assembly

    Replacing the front fan assembly This procedure describes how to remove and replace the front fan assembly. 1. Remove the computer cover. See “Removing the cover” on page 123. 2. Remove the front bezel. See “Removing and replacing the front bezel” on page 128.
  • Page 164 6. Pull on the tips of the rubber mounts until the fan assembly is in place. 7. Route the fan cable to the system board and connect the cable to the system board. See “Locating parts on the system board” on page 125. 8.

  • Page 165: Replacing The Front Audio/Usb Assembly

    Replacing the front audio/USB assembly This procedure describes how to remove and replace the front audio/USB assembly. 1. Remove the computer cover. See “Removing the cover” on page 123. 2. Remove the front bezel. See “Removing and replacing the front bezel” on page 128 3.

  • Page 166: Replacing The Power Switch/Led Assembly

    Replacing the power switch/LED assembly This procedure describes how to remove and replace the power switch/LED assembly. 1. Remove the computer cover. See “Removing the cover” on page 123. 2. Remove the front bezel. See “Removing and replacing the front bezel” on page 128 3.

  • Page 167: Completing The Fru Replacement

    5. Install the new battery. 6. Replace any PCI adapters that were removed. Note: When the computer is turned on for the first time after battery replacement, an error message might be displayed. This is normal after replacing the battery. 7.
  • Page 168 Hardware Maintenance Manual...

  • Page 169: Chapter 10. Fru Lists

    Memory module, 512 MB PC2-4200 (533MHz) DDR2 SDRAM (models 32B 32H) 41X4251 Memory module, 512 MB PC2-5300 (667MHz) DDR2 SDRAM (models 23S) 41X4255 System board, RS690 (AMD AM2 Sempron, Athlon64,Athlon64x2 ; Gb LAN) GA 42Y9916 Level (models 32B 32H 23S ) © Lenovo 2005, 2008. Portions © IBM Corp. 2005.
  • Page 170 Item # 9680 FRUs FRU# System board, RS690(AMD AM2 Sempron, Athlon64,Athlon64x2 ;Gb LAN) PCB 45C3281 2.0 SDV-SIT Level (models 32B 32H 23S ) 220 Watt Power Supply - Robust (models 32B 32H 23S) 41A9689 220 Watt Power Supply - Standard (models 42A 42T 23S 23A 23K) 41A9693 220 Watt Power Supply - Japan (models 23J) 41A9697...
  • Page 171 39K5120 Chassis Fit (DT) (models) 41N8211 Lenovo USB2.0 Safe key TGE YT300 1GB V1.51 (models) 45C7796 Lenovo USB2.0 Safe key TGE YT300 1GB new V 1.52 (models) 45C7146 9680 Power Cords FRU# Power cord - US (models 23S ) 39M5080...
  • Page 172 9680 Vista Business 32 Recovery DVDs FRU# Italian (models) 45C6796 Norwegian (models) 45C6797 Swedish (models) 45C6798 Danish (models) 45C6799 Dutch (models) 45C6800 Czech (models) 45C6801 Finnish (models) 45C6802 Polish (models) 45C6803 Russian (models) 45C6804 Turkish (models) 45C6805 Hungarian (models) 45C6806 Greek (models) 45C6807 Hong Kong (models)
  • Page 173 9680 Vista Home Premium 32 Recovery DVDs FRU# Romanian (models) 45C6786 Serbian (models) 45C6788 Slovakian (models) 45C6789 9680 Vista Ultimate 32 Recovery DVDs FRU# English (models) 45C6835 Russian English (models) 45C6836 French (models) 45C6837 German (models) 45C6838 Spanish (models) 45C6839 Brazilian (models) 45C6840 Italian (models)

  • Page 174: Machine Type 9681

    Machine Type 9681 Item # 9681 FRUs FRU# Heat sink/RM kit, AMD Athlon/Sempron (models) 41R4802 Microprocessor, 3400+ Sempron AM2 (1.8 GHz processor, 62W) (models) 41X1407 Microprocessor, 3500+ Sempron AM2 (2.0 GHz processor, 62W) (models) 41X1409 Microprocessor, 3600+ Sempron AM2 (2.0 GHz processor, 62W) (models) 41X1411 Microprocessor, 3800+ Sempron AM2 (2.2 GHz processor, 62W) (models) 43C2454...
  • Page 175 Item # 9681 FRUs FRU# Hard disk drive, 500GB (7200RPM), Serial ATA (models) 41X5582 Diskette drive, 3,5″, 1.44MB, 2-mode, (w/bezel) (models) 40Y9105 Diskette drive, 3,5″, 1.44MB, 2-mode, (w/bezel) (models) 40Y9107 Front USB/Audio with bracket (all models) 41N8212 Memory module, 256 MB PC2-4200 (533MHz) DDR2 SDRAM (models) 41X4250 Memory module, 512 MB PC2-4200 (533MHz) DDR2 SDRAM (models) 41X4251...
  • Page 176 9681 FRUs FRU# Foot stand assembly (all models) 41R6235 USB Bracket ASSY (all models) 41R6425 9681 Keyboards (USB Preferred Pro) FRU# US English (models) 41A5289 French Canadian 58 (models) 41A5302 French Canadian 445 (models) 41A5301 LA Spanish (models) 41A5312 Brazilian (models) 41A5294 Thailand (models) 41A5324...
  • Page 177 BATTERY 3V-LITHIUM (all models) 45C1566 Modem Phone Cable (models) 39K5120 Chassis Fit (DT) (models) 41N8211 Lenovo USB2.0 Safe key TGE YT300 1GB V1.51 (models) 45C7796 Lenovo USB2.0 Safe key TGE YT300 1GB new V 1.52 (models) 45C7146 Chapter 10. FRU lists...
  • Page 178 9681 Power Cords FRU# Power cord - US (models) 39M5080 Power cord - China (models) 39M5205 Power cord - Japan (models) 24R2633 Power cord - Brazil (models) 39M5232 Power cord - LA High Volt APU) (models) 39M5067 Power cord - Australia / New Zealand (models) 39M5102 Power cord - Korea (models) 39M5212...
  • Page 179 9681 Windows XP Pro Recovery CDs FRU# Japanese (models) Simplified Chinese (models) Taiwan-TC (models) Hong Kong-TC (models) Korea (models) Multilingual 1 XP-P -- EN, NL, FR, GR, IT (models) Multilingual 2 XP-P -- EN, DK, FI, NO, SV (models) 9681 Vista Home Basic 32 Recovery DVDs FRU# English (models) 45C6814...
  • Page 180 9681 Vista Business 32 Recovery DVDs FRU# NL (models) 45C6800 CZ (models) 45C6801 FI (models) 45C6802 PL (models) 45C6803 RU (models) 45C6804 TR (models) 45C6805 HU (models) 45C6806 GK (models) 45C6807 PO (models) 45C6811 HK (models) 45C6808 SL (models) 45C6809 RE (models) 45C6791 RS (models)
  • Page 181 9681 Vista Ultimate 32 Recovery DVDs FRU# English (models) 45C6835 RE (models) 45C6836 FR/CF (models) 45C6837 GR (models) 45C6838 SP/LA (models) 45C6839 BR (models) 45C6840 IT (models) 45C6841 NO (models) 45C6842 SV (models) 45C6843 DK (models) 45C6844 NL (models) 45C6845 CZ (models) 45C6846 FI (models)

  • Page 182: Machine Type 9682

    Machine Type 9682 Item # 9682 FRUs FRU# 84W heat sink kit for Intel Prescott, Cedarmil, Conroe and Conroe-L 41R4803 microprocessors (all models) Microprocessor, Core 2 Duo CONROE E6300 1066/1860MHZ-2M 65W B-2 (models 41X2495 53B 53H) DVD-RW/CD-RW Rambo 8 - SATA VISTA AND XP (models 53B 53H) 43C1042 Front Power/LED PC, bracket, and cable (all models) 41R6234...
  • Page 183 39K5120 Chassis Fit (DT) (models) 41N8211 Lenovo USB2.0 Safe key TGE YT300 1GB V1.51 (models) 45C7796 Lenovo USB2.0 Safe key TGE YT300 1GB new V 1.52 (models) 45C7146 9682 Power Cords FRU# Power cord - Hong Kong (models 53B 53H)
  • Page 184 9682 Vista Home Basic 32 Recovery DVDs FRU# RU (models) 45C6828 TR (models) 45C6829 HU (models) 45C6830 GK (models) 45C6831 HK (models) 45C6832 SL (models) 45C6833 PO (models) 45C6834 9682 Vista Business 32 Recovery DVDs FRU# English (models) 45C6790 RE (models) 45C6791 FR/CF (models) 45C6792...
  • Page 185 9682 Vista Home Premium 32 Recovery DVDs FRU# NO (models) 45C6773 SV (models) 45C6774 DK (models) 45C6775 NL (models) 45C6776 CZ (models) 45C6777 FI (models) 45C6778 PL (models) 45C6779 RU (models) 45C6780 TR (models) 45C6781 HU (models) 45C6782 GK (models) 45C6783 HK (models 53B) 45C6784...

  • Page 186: Machine Type 9683

    Machine Type 9683 Item # 9683 FRUs FRU# 84W Heatsink kit for Intel Prescott and Cedarmil and Conroe and Conroe-L CPUs 41R4803 (all models) Microprocessor, Core 2 Duo CONROE E6320 1066/1860MHZ-4M 65W B-2 (models 43C3829 23G) DVD-RW/CD-RW Rambo 8 - SATA VISTA AND XP (models 23G) 43C1042 Front Power/LED PC, bracket, and cable (all models) 41R6234...
  • Page 187 9683 FRUs FRU# Mechanical shell kit (all models) 41R6210 Miscellaneous hardware Kit (all models) 41R6213 Hard disk drive bracket Asm (plastic and grommets) (all models) 41R6229 Speaker cable asm, 600 mm cable length (all models) 41N8217 Speaker holder assembly (all models) 41R6231 Front Power/LED PC, bracket, and cable (all models) 41R6234...
  • Page 188 Chassis Fit (DT) (models) 41N8211 Lenovo USB2.0 Safe key TGE YT300 1GB V1.51 (models) 45C7796 Lenovo USB2.0 Safe key TGE YT300 1GB new V 1.52 (models) 45C7146 9683 Power Cords FRU# Power cord - UK, Ireland, Singapore, Malaysia, Brunei (models 23G)
  • Page 189 9683 Windows XP Pro Recovery CDs FRU# HU (models 23G) 45C0197 CZ (models) 45C0193 TR (models 23G) 45C0196 GK (models) 45C0199 SL (models) 45C0200 Multilingual 1 XP-P -- EN, NL, FR, GR, IT (models 23G) 45C0178 Multilingual 2 XP-P -- EN, DK, FI, NO, SV (models 23G) 45C0179 9683 Vista Home Basic 32 Recovery DVDs FRU#...
  • Page 190 9683 Vista Business 32 Recovery DVDs FRU# NL (models 23G) 45C6800 CZ (models 23G) 45C6801 FI (models 23G) 45C6802 PL (models 23G) 45C6803 RU (models 23G) 45C6804 TR (models 23G) 45C6805 HU (models 23G) 45C6806 GK (models 23G) 45C6807 HK (models) 45C6808 PO (models 23G) 45C6811...
  • Page 191 9683 Vista Ultimate 32 Recovery DVDs FRU# English (models ) 45C6835 RE (models) 45C6836 FR/CF (models) 45C6837 GR (models) 45C6838 SP/LA (models) 45C6839 BR (models) 45C6840 IT (models) 45C6841 NO (models) 45C6842 SV (models) 45C6843 DK (models) 45C6844 NL (models) 45C6845 CZ (models) 45C6846...

  • Page 192: Machine Type 9684

    Machine Type 9684 Item # 9684 FRUs FRU# 84W Heat sink kit for Intel Prescott & Cedarmil & Conroe & Conroe-L 41R4803 microprocessors (all models) Microprocessor, Celeron-D 430 CONROE-L 800/1800MHZ-512K,LGA,EM64T 43C1964 (models 39B 39H) Microprocessor, Celeron-D 440 CONROE-L 800/1800MHZ-512K,LGA,EM64T 43C1965 (models 42B 42H) Microprocessor, E4300 CONROE 800/1800MHZ-2M, LGA, EM64T (models 23S) 42Y8009...
  • Page 193 Item # 9684 FRUs FRU# Hard disk drive, 160GB 7200rpm Serial ATA (models 42B 42H 62S 62D 62Y 23S 40Y9035 72S 72D 72Y 39B 39H 78S 78D 78Y 79S 79D 79Y 83S 83D 83Y 92S 92D 92Y 5BG 5CG 6BG 6CG 6DG) Hard disk drive, 250GB (7200RPM), Serial ATA (models 63B 63H 56B 56H ) 40Y9036 Diskette drive, 3,5″, 1.44MB, 2-mode, (w/bezel) (models)
  • Page 194 9684 FRUs FRU# EMC shield, blank diskette drive (all models) 41R6227 Cover (all models) 41R6228 Mechanical shell kit (all models) 41R6210 Miscellaneous hardware Kit (all models) 41R6213 Hard disk drive bracket Asm (plastic and grommets) (all models) 41R6229 Speaker cable asm, 600 mm cable length (all models) 41N8217 Retention module Asm, AMD (all models) 41R2507...
  • Page 195 9684 Keyboards (USB Preferred Pro) FRU# Portugese (models 5CG 5BG 5DG 6BG 6CG 6DG) 41A5315 Romanian (models 5CG 5BG 5DG 6BG 6CG 6DG) 41A5317 Russian/Cyrillic (models 5CG 5BG 5DG 6BG 6CG 6DG) 41A5318 Serbian/Cyrilic (models 5CG 5BG 5DG 6BG 6CG 6DG) 41A5319 Slovak (models 5CG 5BG 5DG 6BG 6CG 6DG) 41A5320...
  • Page 196 9684 Power Cords FRU# Power cord - Italy (models 62S 23S 62Y 72Y 57S 57Y 58S 58Y 59S 59Y 78S 78Y 79S 79Y 65S 39M5164 65Y 67S 67Y 68S 68Y 83S 83Y 92S 92Y 5CG 5BG 5DG) Power cord - Israel (models 5CG 5BG 5DG 6BG 6CG 6DG) 39M5171 9684 Windows XP Pro Recovery CDs FRU#...
  • Page 197 9684 Vista Home Basic 32 Recovery DVDs FRU# NL (models) 45C6824 CZ (models) 45C6825 FI (models) 45C6826 PL (models) 45C6827 RU (models) 45C6828 TR (models) 45C6829 HU (models) 45C6830 GK (models) 45C6831 HK (models) 45C6832 SL (models) 45C6833 PO (models) 45C6834 9684 Vista Business 32 Recovery DVDs FRU#...
  • Page 198 9684 Vista Home Premium 32 Recovery DVDs FRU# GR (models) 45C6769 SP/LA (models) 45C6770 BR (models) 45C6771 IT (models) 45C6772 RE (models) 45C6767 NO (models) 45C6773 SV (models) 45C6774 DK (models) 45C6775 NL (models) 45C6776 CZ (models) 45C6777 FI (models) 45C6778 PL (models) 45C6779...
  • Page 199 9684 Vista Ultimate 32 Recovery DVDs FRU# GK (models) 45C6852 HK (models ) 45C6853 SL (models) 45C6854 PO (models) 45C6855 Chapter 10. FRU lists...

  • Page 200: Machine Type 9685

    Machine Type 9685 Item # 9685 FRUs FRU# 84W Heat sink kit for Intel Prescott, Cedarmil, Conroe and Conroe-L 41R4803 microprocessors (all models) Microprocessor, Pentium D 925 PRESLER Processor 3.0 GHz 800 FSB 2MBx2 L2 41X2413 C1-Value (95W) (-VT) D0-Value (models 42G) Microprocessor, CONROE E4300 800/1800MHz 2M B-2 (models 23G) 42Y8009 Microprocessor, Conroe-L E2140 800/1600MHZ-1M, LGA, EM64T (models 52G...
  • Page 201 Item # 9685 FRUs FRU# 220 Watt Power Supply - Robust Standard (models 23G 42G 52G 53G 54G 57G) 41A9689 220 Watt Power Supply - Standard (models 23G 42G 52G 53G 54G 57G) 41A9693 The FRUs listed in the following tables are not illustrated. 9685 FRUs FRU# Fan Duct (all models)
  • Page 202 Chassis Fit (DT) (models) 41N8211 Lenovo USB2.0 Safe key TGE YT300 1GB V1.51 (models 54G) 45C7796 Lenovo USB2.0 Safe key TGE YT300 1GB new V 1.52 (models) 45C7146 9685 Power Cords FRU# Power cord - UK, Ireland, Singapore, Malaysia, Brunei (models 23G 42G 52G 53G 54G...
  • Page 203 9685 Windows XP Pro Recovery CDs FRU# GR (models 42G 52G 57G 23G 53G 54G) 45C0184 IT (models 42G 52G 57G 23G 53G 54G) 45C0185 BR (models) 45C0182 SP/LA (models) 45C0181 DK (models 42G 52G 57G 23G 53G 54G) 45C0189 NL (models 42G 52G 57G 23G 53G 54G) 45C0192 AE (models 42G 52G 57G 23G 53G 54G)
  • Page 204 9685 Vista Home Basic 32 Recovery DVDs FRU# GK (models) 45C6831 HK (models) 45C6832 SL (models) 45C6833 PO (models) 45C6834 9685 Vista Business 32 Recovery DVDs FRU# English (models 23G 53G 54G) 45C6790 French (models 23G 53G 54G) 45C6792 German (models 23G 53G 54G) 45C6793 SP/LA (models) 45C6794...
  • Page 205 9685 Vista Home Premium 32 Recovery DVDs FRU# NL (models) 45C6776 CZ (models) 45C6777 FI (models) 45C6778 PL (models) 45C6779 RU (models) 45C6780 TR (models) 45C6781 HU (models) 45C6782 GK (models) 45C6783 HK (models ) 45C6784 SL (models) 45C6785 RO (models) 45C6786 PO (models) 45C6787...

  • Page 206: Machine Type 9686

    Machine Type 9686 Item # 9686 FRUs FRU# Heat sink kit for AMD (all models) 41R4802 Microprocessor, 3800+ Athlon64 AM2 (2.4 GHz processor, 62W) (models 42U) 41X1417 Microprocessor, 3800+ Athlon64 AM2 X2 (2.0 GHz processor, 89W) (models 34U 41X4241 34F 35U 35F 36U 36F 37S 37D 37Y 38S 38D 38Y 67G) Microprocessor, 4000+ Athlon64 AM2 X2 (2.1 GHz processor, 65W) G1 (models 43C3965 42U 43S 43D 43Y 45S 46S 47S 47D 47Y 48S 4AU 4BU 4CU 42F 4AF 4BF 4CF 4DS...
  • Page 207 Item # 9686 FRUs FRU# DVD-RW/CD-RW Rambo 8 - SATA (models 43S 43D 43Y 45S 4BU 4CU 56U 57U 43C1042 63U 4BF 4CF 56F 57F 58S 63U 63F 36U 36F 37S 37D 37Y 5AS 5AD 5AY 4GG 5BG 5CG) Diskette drive, 3,5″, 1.44MB, 2-mode, (w/bezel) (models) 40Y9105 Diskette drive, 3,5″, 1.44MB, 2-mode, (w/bezel) (models) 40Y9107...
  • Page 208 9686 FRUs FRU# Front main panel assembly (all models) 41R6206 Chassis assembly (all models) 41R6239 Cover (all models) 41R6242 No Optical Bezel and Shield, Blk (Secondary) (all models) 41N8080 ODD/FDD/Card Reader Retainers (all models) 43N9352 9686 Keyboards (USB Preferred Pro) FRU# US English (models 42U 4AU 4BU 4CU 54U 56U 57U 62U 63U 23H 4EU 59U 65U 63U 41A5289...
  • Page 209 ATI Radeon X1300LE 256MB 64bit DMS59 Dual Output (LP) (models 4GG) 42Y8162 Modem Phone Cable (models) 39K5120 Lenovo USB2.0 Safe key TGE YT300 1GB V1.51 (models 72G 5CG 82G) 45C7796 Lenovo USB2.0 Safe key TGE YT300 1GB new V 1.52 (models) 45C7146...
  • Page 210 9686 Windows XP Pro Recovery CDs FRU# NL (models 67G 5BG 5CG) 45C0192 AE (models 67G 5BG 5CG) 45C0186 SV (models 67G 5BG 5CG) 45C0188 FI (models 67G 5BG 5CG) 45C0190 NO (models 67G 5BG 5CG) 45C0191 HE (models 67G 5BG 5CG) 45C0194 PL (models 67G 5BG 5CG) 45C0195...
  • Page 211 9686 Vista Business 32 Recovery DVDs FRU# English (models 42U 4AU 4BU 23H 54U 56U 62U 35U 36U 5CG) 45C6790 FR/CF (models 42F 4AF 4BF 54F 56F 62F 35F 36F 5CG) 45C6792 German (models 5CG) 45C6793 SP/LA (models 46S 58S 4FS 4FD 4FY) 45C6794 Brazilian (models) 45C6795...
  • Page 212 9686 Vista Home Premium 32 Recovery DVDs FRU# HU (models) 45C6782 GK (models) 45C6783 HK (models ) 45C6784 SL (models) 45C6785 RO (models) 45C6786 PO (models) 45C6787 RS (models) 45C6788 SK (models) 45C6789 9686 Vista Ultimate 32 Recovery DVDs FRU# English (models 4CU 57U 63U) 45C6835 RE (models)

  • Page 213: Machine Type 9687

    Machine Type 9687 Item # 9687 FRUs FRU# Heat sink kit for AMD (all models) 41R4802 Microprocessor, 3600+ Sempron AM2 (2.0 GHz processor, 62W) (models 35G 36G) 41X1411 Microprocessor, 3800+ Sempron AM2 (2.2GHz processor, 62W) F2 (models 45G) 43C2454 Microprocessor, 3800+ Athlon64 AM2 (2.4 GHz processor, 62W) (models 43G 41X1417 Microprocessor, 4400+ Athlon64 AM2 X2 (2.3 GHz processor, 65W) (models 63G 43C3507...
  • Page 214 Item # 9687 FRUs FRU# Diskette drive, 3,5″, 1.44MB, 2-mode, (w/bezel) (models 42Q 62Q) 40Y9107 Bezel assembly (all models) Power switch/LED assembly (all models) Internal Speaker Assembly (TOWER) (models) 39P5023 Front audio/USB assembly (all models) 41N8054 Hard disk drive, 80GB (7200RPM), Serial ATA (models 35G) 40Y9034 Hard disk drive, 160GB (7200RPM), Serial ATA (models 43G 52G 54G 57G 36G 40Y9035...
  • Page 215 Speaker Brick - Hong Kong, EMEA (models 63G 64G 65G 36G 45G) 89P8573 Modem Phone Cable (models) 39K5120 Lenovo USB2.0 Safe key TGE YT300 1GB V1.51 (models 54G 57G) 45C7796 Lenovo USB2.0 Safe key TGE YT300 1GB new V 1.52 (models) 45C7146...
  • Page 216 9687 Power Cords FRU# Power cord - Italy (models 35G 43G 52G 23G 54G 57G 63G 64G 65G 36G 45G) 39M5164 Power cord - Denmark (models 35G 43G 52G 23G 54G 57G 63G 64G 65G 36G 45G) 39M5129 Power cord - Switzerland (models 35G 43G 52G 23G 54G 57G 63G 64G 65G 36G 45G) 39M5157 Power cord - Israel (models 35G 43G 52G 23G 54G 57G 63G 64G 65G 36G 45G) 39M5171...
  • Page 217 9687 Vista Home Basic 32 Recovery DVDs FRU# Italian (models 35G 36G) 45C6820 Norwegian (models 35G 36G) 45C6821 Swedish (models 35G 36G) 45C6822 Danish (models 35G 36G) 45C6823 Dutch (models 35G 36G) 45C6824 Czech (models 35G 36G) 45C6825 Finnish (models 35G 36G) 45C6826 Polish (models 35G 36G) 45C6827...
  • Page 218 9687 Vista Home Premium 32 Recovery DVDs FRU# English (models) 45C6766 FR/CF (models) 45C6768 GR (models) 45C6769 SP/LA (models) 45C6770 BR (models) 45C6771 IT (models) 45C6772 RE (models) 45C6767 NO (models) 45C6773 SV (models) 45C6774 DK (models) 45C6775 NL (models) 45C6776 CZ (models) 45C6777...
  • Page 219 9687 Vista Ultimate 32 Recovery DVDs FRU# TR (models) 45C6850 HU (models) 45C6851 GK (models) 45C6852 HK (models ) 45C6853 SL (models) 45C6854 PO (models) 45C6855 Chapter 10. FRU lists...

  • Page 220: Machine Type 9688

    Machine Type 9688 Item # 9688 FRUs FRU# 84W Heat sink kit for Intel Prescott & Cedarmil & Conroe & Conroe-L CPUs 41R4803 Microprocessor, E4400 L-2 CONROE 800/2000MHZ-2M (models 52B 52H 56G 43C2056 57G) Microprocessor, CONROE E6320 1066/1860MHZ-4M B-2 (models 23B 25G) 43C3829 Microprocessor, Conroe-L E2160 800/1800MHZ-1M, LGA, EM64T (models 42B 43C1968...
  • Page 221 Item # 9688 FRUs FRU# System board, Intel Bearlake G33 - GA Level (models 42B 42H 23B 52B 52H 56G 87H5161 57G 25G) Rear Fan (all models) 41R2519 ATX 280W Power supply; Standard (models 56G 57G 25G) 41A9679 280W ATX Power Supply; Robust; For China and India standard (models 56G 57G 41A9684 25G) The FRUs listed in the following tables are not illustrated.
  • Page 222 Speaker Brick - Hong Kong, EMEA (models 56G 57G 25G) 89P8573 Modem Phone Cable (models) 39K5120 Lenovo USB2.0 Safe key TGE YT300 1GB V1.51 (models 57G 25G) 45C7796 Lenovo USB2.0 Safe key TGE YT300 1GB new V 1.52 (models) 45C7146...
  • Page 223 9688 Windows XP Pro Recovery CDs FRU# FR/CF (models 57G 25G 56G) 45C0180 BR (models) 45C0182 GR (models 57G 25G 56G) 45C0184 IT (models 57G 25G 56G) 45C0185 SP/LA (models 57G 25G 56G) 45C0181 DK (models 57G 25G 56G) 45C0189 NL (models 57G 25G 56G) 45C0192 AE (models 57G 25G 56G)
  • Page 224 9688 Vista Home Basic 32 Recovery DVDs FRU# Hungarian (models) 45C6830 Greek (models) 45C6831 Hong Kong (models) 45C6832 Slovenian (models) 45C6833 Portuguese (models) 45C6834 9688 Vista Business 32 Recovery DVDs FRU# English (models 57G 25G) 45C6790 FR/CF (models 57G 25G) 45C6792 German (models 57G 25G) 45C6793...
  • Page 225 9688 Vista Home Premium 32 Recovery DVDs FRU# DK (models) 45C6775 NL (models) 45C6776 CZ (models) 45C6777 FI (models) 45C6778 PL (models) 45C6779 RU (models) 45C6780 TR (models) 45C6781 HU (models) 45C6782 GK (models) 45C6783 HK (models ) 45C6784 SL (models) 45C6785 RO (models) 45C6786...

  • Page 226: Machine Type 9689

    Machine Type 9689 Item # 9689 FRUs FRU# 84W Heat sink kit for Intel Prescott, Cedarmil, Conroe, and Conroe-L 41R4803 microprocessors (all models) Microprocessor, Core 2 Duo CONROE E4400 800/2000MHz 2M 65W L-2 (models 43C2056 26G 54G 27G 29G 2AG) Microprocessor, Core 2 Duo CONROE E4500 800/2.2GHz 2M 65W M-0 (models 43C6305 28G 56G 57G 58G 59G)
  • Page 227 Item # 9689 FRUs FRU# Internal Speaker Assembly-optional (all models) 39P5023 Front audio/USB assembly (all models) 41N8054 Hard disk drive, 160GB (7200rpm), Serial ATA (models 23G 26G 32G 54G 27G 34G 40Y9035 28G) Hard disk drive, 250GB (7200rpm) Serial ATA (models 29G 2AG 56G 57G 36G 62G 40Y9036 58G 59G 63G) Hard disk drive, 320GB (7200rpm) SATA/8MB (models 42G 64G)
  • Page 228 Italian (models 23G 26G 32G 54G 27G 34G 28G 29G 2AG 56G 57G 36G 62G 58G 59G 63G 41A5309 64G) Spanish (models 23G 26G 32G 54G 27G 34G 28G 29G 2AG 56G 57G 36G 62G 58G 59G 41A5321 63G 64G) Swedish/Finnish (models 23G 26G 32G 54G 27G 34G 28G 29G 2AG 56G 57G 36G 62G 41A5322 58G 59G 63G 64G)
  • Page 229 36G 62G 58G 59G 63G 64G) Modem Phone Cable (models) 39K5120 Lenovo USB2.0 Safe key TGE YT300 1GB V1.51 (models 27G 34G 57G 36G 62G 59G 64G) 45C7796 Lenovo USB2.0 Safe key TGE YT300 1GB new V 1.52 (models) 45C7146...
  • Page 230 9689 Windows XP Pro Recovery CDs FRU# SV (models 23G 26G 32G 54G 27G 34G 28G 29G 2AG 56G 57G 36G 62G 58G 63G) 45C0188 HE (models 23G 26G 32G 54G 27G 34G 28G 29G 2AG 56G 57G 36G 62G 58G 63G) 45C0194 FI (models 23G 26G 32G 54G 27G 34G 28G 29G 2AG 56G 57G 36G 62G 58G 63G) 45C0190...
  • Page 231 9689 Vista Business 32 Recovery DVDs FRU# English (models 23G 26G 32G 54G 27G 34G 28G 29G 2AG 56G 57G 36G 62G 59G 64G) 45C6790 FR/CF (models 23G 26G 32G 54G 27G 34G 28G 29G 2AG 56G 57G 36G 62G 59G 64G) 45C6792 German (models 23G 26G 32G 54G 27G 34G 28G 29G 2AG 56G 57G 36G 62G 59G 64G) 45C6793...
  • Page 232 9689 Vista Home Premium 32 Recovery DVDs FRU# TR (models) 45C6781 HU (models) 45C6782 GK (models) 45C6783 HK (models ) 45C6784 SL (models) 45C6785 RO (models) 45C6786 PO (models) 45C6787 RS (models) 45C6788 SK (models) 45C6789 9689 Vista Ultimate 32 Recovery DVDs FRU# English (models) 45C6835...

  • Page 233: Machine Type 9690

    Machine Type 9690 Item # 9690 FRUs FRU# 84W Heat sink kit for Intel Prescott, Cedarmil, Conroe, and Conroe-L 41R4803 microprocessors (all models) Microprocessor, Celeron-D 420 CONROE-L 800/1800MHZ-512K, LGA, EM64T 43C3835 (models 82S 82D 82Y 83S 83D 83Y 84U 84F 85U 85F 86P 87P 89P 8BP 8CP 8DP 8FG 8GG 8HG 8JG) Microprocessor, Celeron-D 430 CONROE-L 800/1800MHZ-512K,LGA,EM64T 43C1964...
  • Page 234 Item # 9690 FRUs FRU# Microprocessor, Core 2 Duo CONROE E4600 800/2.4GHz 2M 65W M-0 (models 45C5282 DBP) Microprocessor, Pentium Dual-core Conroe-L E2180 800/2.0GHZ-1M, LGA, EM64T 45C1773 65W L-2 M-0 (models 9BP) Memory module, 512 MB PC2-4200 (533MHz) DDR2 SDRAM (models 34S 34D 41X4251 34Y 35B 35H 42B 52S 52D 52Y 53S 56P 5AU 63U 23U 23P 34P36B 36H 5AU 5AF 5BB 5FS 5FD 5FY 5GU 62U 62F 6DS 6EU 7BU 7BF 7DS 7HS 7MU 7MF 7NU 82S...
  • Page 235 Item # 9690 FRUs FRU# System board, Intel 945GC (LGA775 Celeron, P4, PD, Up to 800MHz support, 42Y9915 100Mb LAN) GA Level (models 34S 34D 34Y 35B 35H 42B 52S 52D 52Y 53S 56P 57S 58U 59U 5AU 62U 63U 65S 67S 23U 23P 75S 76P 34P 36B 36H 58U 58F 59U 59F 5AU 5AF 5BB 5FS 5FD 5FY 5GU 62U 62F 63U 63F 6CP 6DS 6EU 7BU 7BF 7CP 7DS 7ES 7FP 7GP 7HS 7KU 7KF 7MU 7MF 7NU 82S 82D 82Y 83S 83D 83Y 84U 84F 85U 85F 7PS 7PD 7PY 7QS 7QD 7QY 52P 56P 5CP 5DP 5EP 7KP 78P 79P 82P...
  • Page 236 9690 FRUs FRU# Cable, Serial ATA (Foxconn Version), 457mm ODD (all models) 43N9013 Front Fan--Used with 2X500G HDDs only (all models) 41R4791 Optional HDD Bracket Asm (all models) 41R6106 No Optical Bezel and Shield, Blk (Secondary) (all models) 41N8080 ODD and FDD shield, Plastic (all models) 41R6207 Shield, FDD EMC (all models) 41N8078...
  • Page 237 Speaker Power brick - Brazil (models 37P 38P 9BP DBP) 89P8583 Modem Phone Cable (models) 39K5120 Lenovo USB2.0 Safe key TGE YT300 1GB V1.51 (models 8GG 5LG 6HG 2LG 8JG) 45C7796 Lenovo USB2.0 Safe key TGE YT300 1GB new V 1.52 (models) 45C7146...
  • Page 238 9690 Power Cords FRU# Power cord - US (models 34S 34D 52S 52D 53S 57S 58U 59U 5AU 62U 63U 65S 67S 23U 39M5080 75S 58U 58F 59U 59F 5AU 5AF 5FS 5FD 5GU 62U 62F 63U 63F 6DS 6EU 7BU 7BF 7DS 7ES 7HS 7KU 7KF 7MU 7MF 7NU 82S 82D 83S 83D 84U 84F 85U 85F 7PS 7QS 7PD 7QD 7RU 27U 28U 29U 27F 28F 29F 2BS 2CS BCS 2BD 2CD BCD) Power cord - Brazil (Portuguese) (models 56P 23P 76P 34P 6CP 7CP 7FP 7GP 52P 56P 5CP...
  • Page 239 9690 Windows XP Pro Recovery CDs FRU# Multilingual 2 XP-P -- EN, DK, FI, NO, SV (models 8FG 8GG 5KG 5LG 6GG 2KG 8HG) 45C0179 9690 Vista Home Basic 32 Recovery DVDs FRU# English (models 84U 85U) 45C6814 Russian English (models) 45C6815 French (models 84F 85F) 45C6816...
  • Page 240 9690 Vista Business 32 Recovery DVDs FRU# Russian (models 8GG 5LG 6HG 2LG 8JG) 45C6804 Turkish (models 8GG 5LG 6HG 2LG 8JG) 45C6805 Hungarian (models 8GG 5LG 6HG 2LG 8JG) 45C6806 Greek (models 8GG 5LG 6HG 2LG 8JG) 45C6807 Hong Kong (models) 45C6808 Portuguese (models 8GG 5LG 6HG 2LG 8JG) 45C6811...
  • Page 241 9690 Vista Ultimate 32 Recovery DVDs FRU# GR (models) 45C6838 SP/LA (models) 45C6839 BR (models) 45C6840 IT (models) 45C6841 NO (models) 45C6842 SV (models) 45C6843 DK (models) 45C6844 NL (models) 45C6845 CZ (models) 45C6846 FI (models) 45C6847 PL (models) 45C6848 RU (models) 45C6849 TR (models)

  • Page 242: Machine Type 9691

    Machine Type 9691 Item # 9691 FRUs FRU# 84W Heat sink kit for Intel Prescott, Cedarmil, Conroe, and Conroe-L 41R4803 microprocessors (all models) Microprocessor, Celeron-D 420 CONROE-L 800/1800MHZ-512K, LGA, EM64T 43C3835 (models 52G 53G 54G) Microprocessor, Pentium D 925 PRESLER Processor 3.0 GHz 800 FSB 2MBx2 L2 41X2413 C1-Value (95W) (-VT) D0-Value (models 62G 63G) Microprocessor, Core 2 Duo CONROE E4300 800/1800MHz 2M 65W L-2 (models...
  • Page 243 Item # 9691 FRUs FRU# DVD-ROM/CD-RW Combo Drive - 48x/32x/48x/16x - SATA (models 43G 23G 42Y9353 24G 62G) DVD-Recordable Rambo 8 - SATA (models 45G 46G 48G 63G 49G 4AG 25G 26G 43C1042 27G 34G 35G 28G 36G) Diskette drive, 3,5″, 1.44MB, 2-mode, (w/bezel) (models 32Q 42Q) 40Y9105 Diskette drive, 3,5″, 1.44MB, 2-mode, (w/bezel) (models 32Q 42Q) 40Y9107...
  • Page 244 9691 FRUs FRU# ODD/FDD/Card Reader Retainers (all models) 43N9352 9691 Keyboards (USB Preferred Pro) FRU# US English (models 43G 23G 24G 52G 53G 45G 46G 62G 48G 63G 54G 49G 4AG 25G 26G 41A5289 27G 34G 35G 28G 36G) Danish (models 43G 23G 24G 52G 53G 45G 46G 62G 48G 63G 54G 49G 4AG 25G 26G 27G 41A5298 34G 35G 28G 36G) Dutch (models 43G 23G 24G 52G 53G 45G 46G 62G 48G 63G 54G 49G 4AG 25G 26G 27G...
  • Page 245 49G 4AG 25G 26G 27G 34G 35G 28G 36G) Modem Phone Cable (models) 39K5120 Lenovo USB2.0 Safe key TGE YT300 1GB V1.51 (models 48G 25G 27G 36G) 45C7796 Lenovo USB2.0 Safe key TGE YT300 1GB new V 1.52 (models) 45C7146...
  • Page 246 9691 Windows XP Pro Recovery CDs FRU# US/UK/AP/TH (models 53G 45G 62G 43G 23G 52G 46G 48G 25G 26G 27G) 43C9043 FR/CF (models 53G 45G 62G 43G 23G 52G 46G 48G 25G 26G 27G) 45C0180 GR (models 53G 45G 62G 43G 23G 52G 46G 48G 25G 26G 27G) 45C0184 IT (models 53G 45G 62G 43G 23G 52G 46G 48G 25G 26G 27G) 45C0185...
  • Page 247 9691 Vista Home Basic 32 Recovery DVDs FRU# Polish (models 35G) 45C6827 Russian (models 35G) 45C6828 Turkish (models 35G) 45C6829 Hungarian (models 35G) 45C6830 Greek (models 35G) 45C6831 Hong Kong (models) 45C6832 Slovenian (models 35G) 45C6833 Portuguese (models 35G) 45C6834 9691 Vista Business 32 Recovery DVDs FRU# English (models 43G 23G 52G 46G 48G 25G 27G)
  • Page 248 9691 Vista Home Premium 32 Recovery DVDs FRU# RE (models) 45C6767 NO (models) 45C6773 SV (models) 45C6774 DK (models) 45C6775 NL (models) 45C6776 CZ (models) 45C6777 FI (models) 45C6778 PL (models) 45C6779 RU (models) 45C6780 TR (models) 45C6781 HU (models) 45C6782 GK (models) 45C6783...

  • Page 249: Chapter 11. Additional Service Information

    2. Lenovo Customer Support Center 3. Levels 1 and 2 Support To update (flash) the BIOS, see “Flash update procedures.” Flash update procedures This section details how to flash (update) the BIOS. © Lenovo 2005, 2008. Portions © IBM Corp. 2005.

  • Page 250: Updating (Flashing) Bios From A Cd-Rom Or Diskette

    This section describes how to update (flash) the BIOS using a diskette or CD-ROM. System program updates are available at http://www.lenovo.com/support on the World Wide Web. 1. To update (flash) the BIOS: v From a CD-ROM, make sure the computer is turned on. Insert the CD-ROM into the optical drive.

  • Page 251: Power Management

    Power management Power management reduces the power consumption of certain components of the computer such as the system power supply, processor, hard disk drives, and some monitors. Automatic configuration and power interface (ACPI) BIOS Being an ACPI BIOS system, the operating system is allowed to control the power management features of the computer and the setting for Advanced Power Management (APM) BIOS mode is ignored.
  • Page 252 Hardware Maintenance Manual...

  • Page 253: Appendix. Notices

    Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk.

  • Page 254: Television Output Notice

    Macrovision Corporation. Reverse engineering or disassembly is prohibited. Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo Lenovo Care...
  • Page 256 Part Number: 43C3182 Printed in USA (1P) P/N: 43C3182...

This manual is also suitable for:

J200pJ205969059u - j200 - 96903000 78123000 78133000 7814 ... Show all

Table of Contents