Ps/2 Mouse; Ps/2 Keyboard - Toshiba PT831U-102T97 User Manual

PS/2 mouse

Use the PS/2 keyboard/mouse port on the computer or optional
Advanced Port Replicator II to connect a PS/2 mouse.
Make sure the mouse has a cable with a 6-pin connector for the PS/2
mouse port. If the mouse's cable is not compatible, see your dealer for an
adaptor cable.
How the computer treats the connection to a PS/2 mouse depends on the
setting for Pointing Devices under the HW Setup program. If
Simultaneous is selected, you can operate both the AccuPoint and the
PS/2 mouse. If Auto-Selected is chosen, the AccuPoint is disabled
when a PS/2 mouse is connected.
If you connect a PS/2 mouse to the computer while it is in Standby mode,
you will not be able to use the mouse when you turn the computer on.
To connect a PS/2 mouse:
1. Turn the computer off.
2. Connect the PS/2 mouse to the PS/2 keyboard/mouse port on the
computer or the mouse port on the optional Advanced Port
Replicator, pressing gently to assure a firm connection.
3. Turn on the computer.
To disconnect the mouse, turn off the computer and pull out the mouse
connector.
Consult your mouse manual for instructions on how to install necessary
software.

PS/2 keyboard

Use the PS/2 keyboard/mouse port on the computer or optional
Advanced Port Replicator to connect a PS/2 keyboard. When an external
keyboard is connected, you can use both the external keyboard and the
computer's internal keyboard. To connect a PS/2 keyboard:
If you connect a PS/2 keyboard to the computer while it is in Standby
mode, you will not be able to use the keyboard when you turn the
computer on.
1. Turn the computer off.
2. Plug the PS/2 keyboard connector into the PS/2 keyboard/mouse port
on the computer or the keyboard port on the optional Advanced Port
Replicator, pressing gently to assure a firm connection.
3. Turn on the computer.
To disconnect the keyboard, turn off the computer and pull out the
keyboard connector.
Tecra S1 Series
Optional Devices
8-15