Toshiba PT831U-102T97 User Manual page 128

You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
U
N
1
2
C
P
This procedure does not affect the settings.
* In this computer, CD refers to the CD-ROM, DVD-ROM,
CD-RW/DVD-ROM or DVD Multi drives.
PC card HDD boot is not supported.
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer.
2. The following menu will be displayed.
3. Use the up/down cursor keys to select boot device you want and
press Enter.
A bar will appear only under the selected device.
4. Use the left/right cursor keys to highlight the boot device you want
and press Enter.
If a supervisor password is set, the menu above does not appear when
you use the user password to start the computer.
The selection method above does not change the boot priority settings in
HW Setup.
If you press a key other than one of those above or if the selected device
is not installed, the system will boot according to the current setting in HW
Setup.
Tecra S1 Series
Selects the USB diskette drive.
Selects the network.
Selects the primary HDD.
Selects the secondary HDD.
Selects the CD-ROM*.
Selects the PC card HDD.
HW Setup and Passwords
7-7