When Writing Or Rewriting; Writing Cd/Dvds On Dvd Multi Drive; Important Message - Toshiba PT831U-102T97 User Manual

When writing or rewriting

Note the following when you write or rewrite a CD-R or CD-RW.
■
Always copy data from the HDD to the CD. Do not use cut-and-paste.
The original data will be lost if there is a write error.
■
Do not perform any of the following actions:
■
■
■
■
■
■
■
If the media is poor in quality, dirty or damaged, writing or rewriting
errors may occur.
■
Set the computer on a level surface and avoid places subject to
vibration such as airplanes trains, or cars. Do not use an unstable
surface such as a stand.
■
Keep mobile phones and other wireless communication devices away
from the computer.

Writing CD/DVDs on DVD Multi drive

You can use the DVD Multi drive to write data to either CD-R/-RW or
DVD-R/-RW/-RAM discs. The following applications for writing are
supplied on CD-ROM: Drag'n Drop CD, licensed by Easy Systems Japan
Ltd., and DigiOn Inc., MotionDV STUDIO, DVDfunSTUDIO and DVD-
MovieAlbum, licensed by Matsushita Electric Industrial Co.,Ltd.

Important message

Before you write or rewrite to CD-R/-RW or DVD-R/-RW/-RAM disc, read
and follow all set-up and operating instructions in this section. If you fail
to do so, the DVD Multi drive may not function properly, and you may fail
to write or rewrite, lose data or incur other damage.
Tecra S1 Series
Operate the computer for any other function, including use of a
mouse or Touch Pad, closing/opening the LCD panel.
Start a communication application such as a modem.
Apply impact or vibration to the PC.
Install, remove or connect external devices, including the
following: PC card, SD card, USB devices, external display, i.LINK
devices, optical digital devices.
Use the CD/MP3 control buttons to reproduce music and voice.
Open the optical media drive.
Operating Basics
4-13