6. Grasp the memory module by the sides and pull it out.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
7. Seat the cover and secure it with one screw.
Additional battery pack (9 Cell and 6 Cell)
You can increase the portability of the computer with additional battery
packs (9 Cell : PA3257* , 6 Cell : PA3248*). If you're away from an AC
power source, you can replace a low battery with a fully charged one. See
Chapter
Slim Select Bay 2nd battery pack
You can install a secondary battery pack (PA3249*) in the computer's
Slim Select Bay. For details on installing modules in the Slim Select Bay,
refer to Chapter 4, Operating Basics.
Tecra S1 Series
Removing the memory module
6,
Power and Power-Up Modes.
Optional Devices
8-9