Ps/2 Mouse; Ps/2 Keyboard - Toshiba Portege 7200CTe User Manual

PS/2 mouse

Use the PS/2 mouse/keyboard port on the I/O Adaptor or the mouse port
on the optional DVD Network Dock II to connect a PS/2 mouse.
Make sure the mouse has a cable with a 6-pin connector for the PS/2
mouse port. If the mouse's cable is not compatible, see your dealer for an
adaptor cable.
How the computer treats the connection to a PS/2 mouse depends on the
setting for Pointing Devices under the Others options in the Setup
program. If Simultaneous is selected, you can operate both the
AccuPoint II and the PS/2 mouse. If Auto-Selected is chosen, the
AccuPoint II is disabled when a PS/2 mouse is connected. The
Simultaneous setting might not work with some PS/2 mouses.
To connect a PS/2 mouse:
1. Turn the computer off.
2. Connect the PS/2 mouse to the PS/2 mouse/keyboard port on the
computer or the mouse port on the optional DVD Network Dock II,
pressing gently to assure a firm connection.
3. Turn on the computer.
To disconnect the mouse, turn off the computer and pull out the mouse
connector.
Consult your mouse manual for instructions on how to install
necessary software.

PS/2 keyboard

Use the PS/2 mouse/keyboard port on the I/O Adaptor or the keyboard port on
the optional DVD Network Dock II to connect a PS/2 keyboard. When an
external keyboard is connected, you can use both the external keyboard and
the computer's internal keyboard. To connect a PS/2 keyboard:
1. Turn the computer off.
2. Plug the PS/2 keyboard connector into the PS/2 mouse/keyboard port
on the I/O Adaptor or the keyboard port on the optional DVD Network
Dock II, pressing gently to assure a firm connection.
3. Turn on the computer.
To disconnect the keyboard, turn off the computer and pull out the
keyboard connector.
User's Manual Optional Devices 8-11