In steps
3a
and
3b
, unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or
pick the connectors with your fingers and gently unplug them in the direction of the arrows.
When installing: Plug the red cable into the jack labeled MAIN, and the blue cable into the jack labeled
AUX on the card.
Step
Screw (quantity)
4
M2 × 3 mm, flat-head, nylon-coated (2)
1110 mSATA solid state drive
For access, remove this FRU:
Color
Torque
Black
0.181 Nm
(1.85 kgfcm)
.
Chapter 8
Removing and replacing a FRU
73