Removal steps of the power-button subcard board
When installing: Ensure that the connector is attached firmly.
Step
Screw (quantity)
5
M2 × 3 mm, small-head, nylon-coated (1)
1110 M.2 solid-state drive
For access, remove this FRU:
•
"1010 Lenovo-OneLink-connector cover" on page 60
•
"1030 Base cover assembly" on page 62
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock.
• Never remove the drive while the system is operating or in suspend mode.
Note: The M.2 solid-state drive is available on some models.
70
Hardware Maintenance Manual
1
3
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)