Removal steps of the PCI Express Mini Card for wireless LAN
1
In steps
, unplug the connectors by using the removal tool for the antenna RF connector or pick up the
connectors with your fingers and gently unplug them. Then remove the screw
Step
Screw (quantity)
2
M2 × 3 mm, flat-head, nylon-coated (1)
Remove the PCI Express Mini Card for wireless LAN.
When installing: Plug the black cable into the main connector, and the white cable into the auxiliary
connector.
1060 mSATA solid-state drive
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 42
•
"1020 Bottom slot cover" on page 42
2
1
1
Chapter 8
2
.
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)
.
Removing or replacing a FRU
47