Strategy For Replacing A Hard Disk Drive, A Solid-State Drive, Or An Msata Solid-State Drive; Important Notice For Replacing A System Board; How To Use Error Message; Strategy For Replacing Frus For Cto, Cmv, And Gav - Lenovo ThinkPad X131e Hardware Maintenance Manual

Strategy for replacing a hard disk drive, a solid-state drive, or an mSATA
solid-state drive
Always try to run a low-level format before replacing a hard disk drive. This will cause all customer data on
the hard disk to be lost. Be sure that the customer has a current backup of the data before doing this task.
Attention: The drive startup sequence in the computer you are servicing might have been changed. Be
extremely careful during write operations such as copying, saving, or formatting. If you select an incorrect
drive, data or programs can be overwritten.
If the computer is equipped with both a hard disk drive and an mSATA solid-state drive, do not use the
mSATA solid-state drive as a bootable device. The mSATA solid-state drive is used for the "cache" function
®
and to support the Intel Rapid Start Technology. We recommend that users do not replace the mSATA
solid-state drive by themselves. Otherwise, the "cache" function will not work and the Intel Rapid Start
Technology cannot be used any more.
Attention: Ensure that you partition the mSATA solid-state drive after installing it on the computer you are
servicing. Otherwise, the mSATA solid-state drive will not function correctly. For instructions on how to
partition an mSATA solid-state drive, go to http://www.lenovo.com/support/msata-fru.

Important notice for replacing a system board

Some components mounted on a system board are very sensitive. Improper handling of a system board can
cause damage to those components, and may cause a system malfunction.
Attention: When handling a system board:
• Do not drop a system board or apply any excessive force to it.
• Avoid rough handling of any kind.
• Avoid bending a system board and hard pushing to prevent cracking at each BGA (Ball Grid Array) chipset.

How to use error message

Use the error codes displayed on the screen to diagnose failures. If more than one error code is displayed,
begin the diagnosis with the first error code. Whatever causes the first error code may also cause false error
codes. If no error code is displayed, see whether the error symptom is listed in the Symptom-to-FRU
Index for the computer you are servicing.

Strategy for replacing FRUs for CTO, CMV, and GAV

Product definition

Dynamic Configure To Order (CTO)
This provides the ability for a customer to configure a Lenovo solution from an eSite, and have this
configuration sent to fulfillment, where it is built and shipped directly to the customer. The machine label and
eSupport will load these products as the 4-digit MT and 3-digit model, where model = "CTO" (Example:
1829-CTO).
Custom Model Variant (CMV)
This is a unique configuration that has been negotiated between Lenovo and the customer. A unique 4-digit
MT and 3-digit model is provided to the customer to place orders (Example: 1829-W15). A CMV is a special
bid offering. Therefore, it is NOT generally announced.
20
Hardware Maintenance Manual