2030 USB connector board and USB cable assembly
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 59
•
"1040 Thermal cover" on page 63
•
"1050 Hard disk drive or solid state drive assembly" on page 64
• "1110 Wireless WAN slot cover and PCI Express Mini Card for wireless WAN" on page 72
•
"1110 mSATA solid state drive" on page 73
•
"1120 Palm rest assembly with cables" on page 75
•
"1130 PCI Express Mini Card for wireless LAN" on page 78
• "1160 Media Card Reader slot board and Media Card Reader cable assembly" on page 81
•
"1170 Keyboard" on page 83
•
"1180 Keyboard bezel" on page 85
•
"1190 LCD unit" on page 87
•
"2010 Top shielding assembly" on page 90
Removal steps of USB connector board and USB cable assembly
When installing: Make sure that the connectors are attached firmly.
Step
Screw (quantity)
2
M2 × 3 mm, flat-head, nylon-coated (1)
Cable routing: Route the USB cable assembly as shown in the following figures.
For ThinkPad L520 models:
98
Hardware Maintenance Manual
Torque
Color
Black
0.181 Nm
(1.85 kgfcm)