Pci Configuration - Asus Rambus P3C-L User Manual

4. BIOS SETUP

4.4.3 PCI Configuration

Slot 1, Slot 2, Slot 3/5, Slot 4 IRQ [Auto]
These fields set how IRQ use is determined for each PCI slot. The default
setting for each field is [Auto], which uses auto-routing to determine IRQ use.
Configuration options: [Auto] [NA] [3] [4] [5] [7] [9] [10] [11] [12] [14] [15]
PCI/VGA Palette Snoop [Disabled]
Some nonstandard VGA cards, such as graphics accelerators or MPEG Video
Cards, may not show colors properly. The setting [Enabled] should correct
this problem. Otherwise, leave this on the default setting of [Disabled].
Configuration options: [Disabled] [Enabled]
PCI Latency Timer [32]
Leave on default setting for best performance vs. stability.
Onboard SCSI BIOS [Auto]
Set to [Auto] to enable the onboard SCSI BIOS.
ONB SCSI BIOS First [No]
This field allows giving priority to the onboard SCSI BIOS for SCSI func-
tions over other SCSI controllers.
ONB SCSI SE Term. [Auto]
This allows you to enable or disable the onboard termination for single-
ended (SE) devices, such as scanners, CD-ROMs, or tape drives.
ASUS P3C-L / P3C-S / P3C-LS User's Manual 73