Power Up Control - Asus Rambus P3C-L User Manual

4. BIOS SETUP

4.5.1 Power Up Control

AC PWR Loss Restart [Disabled]
This allows you to set whether you want your system to reboot after the
power has been interrupted. [Disabled] leaves your system OFF and [En-
abled] reboots your system. Configuration options: [Disabled] [Enabled]
PWR Up On Modem Act [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the
computer when the modem receives a call while the computer is in Soft-off
mode. NOTE: The computer cannot receive or transmit data until the com-
puter and applications are fully running, thus connection cannot be made on
the first try. Turning an external modem OFF and then back ON while the
computer is OFF causes an initialization string that will also cause the sys-
tem to power ON. Configuration options: [Disabled] [Enabled]
Wake On LAN [Disabled]
Wake-On-LAN allows your computer to be booted from another computer
via a network by sending a wake-up frame or signal. Configuration options:
[Disabled] [Enabled]
IMPORTANT: This feature requires an optional network interface with Wake-On-
LAN and an ATX power supply with at least 720mA +5V standby power.
78 ASUS P3C-L / P3C-S / P3C-LS User's Manual