Diagnostics Menu Structure; Print Quality Test Pages - Lexmark C510 Service Manual

•
Device tests (displayed only if the flash or disk options are
installed
– Quick disk test (only when disk is installed)
– Disk test/clean (only when disk is installed)
– Flash test (only displayed when a non-defective flash
memory option is installed)
•
Printer setup
– Setting the page count
– Viewing the permanent page count
– Setting configuration ID
•
Error log
– Viewing, printing, and clearing the error log
•
Exit diagnostics

Diagnostics menu structure

When the diagnostic menu is entered, each diagnostic main menu
item displays on the operator panel. When a diagnostic test is
selected from the main menu, a sub menu displays and each
individual test displays in the order shown. Any options that are
referred to in the menus are displayed when the option is installed.

Print quality test pages

Print Quality Description
The Print Quality Test consists of 7 pages. Page 1 contains a
mixture of graphics and text, whereas pages 2 and 3 only contain
graphics.
If Duplex is turned on, then the pages will be duplexed. Otherwise,
they are simplexed. The remaining four pages contain color test
case information that can be used to help diagnose the source of
print defects. Page 1 text consists of the following, and is printed in
English:
•
Value of the Diagnostic EP SETUP settings.
•
Contents of the Diagnostic error log.
•
Printer configuration information, (printer serial number, RIP
code level, Engine code level, Panel code level, Smart
Option code levels, Font version,and so on).
5021-0XX
Diagnostic aids
3-5