Lexmark C510 Service Manual page 96

5021-0XX
Message
56 Parallel Port <x>
Disabled
56 Std Parallel Port
Disabled
57 Configuration
Change
58 Too Many Flash
Options
61 Defective Disk
62 Disk Full
63 Unformatted
Disk
2-18
Service Manual
Description
Data has been sent
to printer through a
parallel port, but
parallel port is
disabled.
Printer cannot
restore confidential
or held jobs on hard
disk because print
configuration has
changed.
Too many flash
memory options are
installed on printer.
Printer detects a
defective hard disk.
There is not enough
memory on hard
disk to store data
sent to printer.
Printer detects an
unformatted hard
disk.
Action
Press Go to clear message.
Printer discards any data
received through parallel port.
Make sure Parallel Buffer
menu item in Parallel Menu is
not set to Disabled.
Press Go to clear message.
Note: Messages 57
Configuration Change and
Held Jobs May Not Be
Restored alternate on display.
Turn off and unplug printer.
Remove excess flash memory.
Plug in printer and turn it on.
Press Go to clear message
and continue printing.
Install a different hard disk
before you perform any
operations that require one.
Press Go to clear message
and continue processing. Any
information not previously
stored on hard disk is deleted.
Delete fonts, macros, and
other data stored on hard disk.
Press Go to clear message
and continue printing.
Format disk before performing
any disk operations. To format
disk, select Format Disk from
Utilities Menu.
If error message remains, hard
disk may be defective and
require replacing. Install a new
hard disk and format it.