Flash Test - Lexmark C510 Service Manual

If the test passes, then the following message is displayed:
•
Disk Test/Clean
Test Passed
If the test fails, then the following message is displayed:
•
Disk Test/Clean
Test Failed
2. Press Go, Return, or Stop to return to the device tests menu
after the test is complete.

Flash test

This test causes the file system to write and read data on the flash to
test the flash.
Warning: This test leaves the flash unformatted. The flash will be
formatted later in this procedure.
To run the flash test:
1. Select Flash Test from the device tests menu.
•
The following message is displayed to warn the customer
that all flash content will be lost: "Files will be lost. Go/Stop."
Press Go to continue, Return or Stop to exit the test
immediately.
•
The power indicator blinks while the test is running.
•
"Flash Test/Test Passed" message displays if the test
passes and the power indicator turns on solid.
•
"Flash Test/Test Failed" message displays if the test fails
and the power indicator turns on solid.
2. Press Go, Return, or Stop to return to the device tests menu.
5021-0XX
Diagnostic aids
3-15