Download Print this page

Allied Telesis 86222-25 Release Note page 2

Patch for rapier switches and ar800 series modular switching routers

Advertisement

2
Some of the issues addressed in this patch include a Level number. This
number reflects the importance of the issue that has been resolved. For details
on level numbers, please contact your authorised distributor or reseller.
Features in 86222-25
Patch 86222-25 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
PCR: 02300
Module: Firewall
If the command ADD FIREWALL POLICY RULE SOURCEPORT=ALL was
executed, a value of "65535" was incorrectly displayed for the
SOURCEPORT parameter for that rule in the SHOW FIREWALL POLICY
command. This issue has been resolved.
PCR: 02400
Module:
CORE,FFS,FILE,INSTALL,SCR
If a problem occurred with NVS, some critical files were lost. As a result, the
equipment was forced to load only boot ROM software at boot time. This
patch combined with the new version of the boot ROM software (pr1-1.2.0
for the AR700 series) resolves this issue.
PCR: 02530
Module: FIREWALL
The GBLIP parameter in the ADD FIREWALL POLICY RULE
ACTION=NONAT command is optional. However, if the command was
executed without the GBLIP parameter set, the command erroneously
failed after a CREATE CONFIGURATION command was executed. This
issue has been resolved.
PCR: 03111
Module: FIREWALL
TCP sessions could fail if the public side of the firewall was using Kerberos
and the private side had a very slow connection to the firewall. This issue
has been resolved.
PCR: 03134
Module: TCP
When using the SET TELNET LISTENPORT command, a fatal error
sometimes occurred. This issue has been resolved.
PCR: 03135
Module: SWI
The TYPE parameter in the SET SWITCH L3FILTER command was not
written to the script file correctly if MATCH was set to NONE. This issue
has been resolved.
PCR: 03143
Module: VRRP
When the PRIORITY parameter in the SET VRRP command was changed,
it was not set correctly when a link was reset. This issue has been resolved.
PCR: 03145
Module: IPG
The SET IP ROUTE FILTER command was not processing some parameters.
This issue has been resolved.
Patch Release Note
Network affecting: No
Network affecting: No
Network affecting: No
Level: 1
Level: 2
Level: 2
Level:
Level: 4
Patch 86222-25 for Software Release 2.2.2
C613-10319-00 REV X

Advertisement

loading