Download Print this page

Allied Telesis 86222-25 Release Note page 13

Patch for rapier switches and ar800 series modular switching routers

Advertisement

Patch 86222-25 For Rapier Switches and AR800 Series Modular Switching Routers
Patch 86222-25 for Software Release 2.2.2
C613-10319-00 REV X
PCR: 02024
Module: IPG
Proxy Arp can now be used on VLAN interfaces.
PCR: 02122
Module: FIREWALL
A fatal error sometimes occurred if a TCP session originating on the public
side of the firewall sent packets before the session was established with the
host on the private side of the firewall. This issue has been resolved.
PCR: 02128
Module: FIREWALL
Some FTP packets handled by the firewall were forwarded with incorrect
sequence numbers, causing FTP sessions to fail. This issue has been
resolved.
PCR: 02150
Module: CORE, SNMP
When passing 64-bit counters in an SNMP packet, only the lower 32 bits
were passed. Now the full 64 bits of the counter will be returned if all are
required.
PCR: 02158
Module: FIREWALL
When a TCP RST/ACK was received by a firewall interface, the packet that
was passed to the other side of the firewall lost the ACK flag, and had an
incorrect ACK number. This issue has been resolved.
PCR 02161
Module: IPG
The IP Filter SIZE parameter was not being applied correctly. This issue has
been resolved.
PCR 02162
Module: IPG
The SET IP FILTER command would not update the SIZE parameter
correctly. This issue has been resolved.
PCR 02172
Module: IPG
The TOS field in IP packets was not being processed by IP POLICY filters
with an identifier greater than 7. This issue has been resolved.
PCR: 02174
Module: FIREWALL
A feature has been added that makes pings pass from the source IP address
of the public interface to the IP address on the private interface in the
firewall.
PCR: 02195
Module: SWI
If a port on a Rapier 48 or Rapier 48 i went down, some associated entries
were not promptly removed from the forwarding, Layer 3 and default IP
tables. This issue has been resolved.
PCR: 02198
Module: DHCP
This PCR includes the following enhancements:
A new command, SET DHCP EXTENDID allows for multiple DHCP
clients, and handling of arbitrary client IDs on the server.
Static DHCP entries now return to the correct state when timing out.
Network affecting: No
Network affecting: No
Network affecting: No
Network affecting: No
Network affecting: No
Network affecting: No
Network affecting: No
Network affecting: No
Network affecting: No
Network affecting: No
Network affecting: Yes
13

Advertisement

loading