Setting The Memory; Ram Disk; Setting Ram Disk; Administrator Settings - Kyocera FS-C5100DN User Manual

Setting the Memory

1
2

RAM Disk

Setting RAM Disk

1
2
3

Administrator Settings

KX DRIVER
By default, the Memory setting matches the standard memory in the printing
system. If optional memory is installed, set the memory in the printer driver to
match the total amount of memory.
Install optional DIMM memory in the printing system.
In Device Settings > Memory, type or select the amount of total installed
memory by clicking the up and down arrows until the text box shows the correct
number of megabytes (MB).
If your printing system includes the Auto Configure feature, you can use it to
obtain information about the memory size.
The RAM disk functions as a virtual hard disk, saving print requests into the
printing system's memory. Because the RAM disk is temporary memory, all data
stored there is lost when the power is turned off.
Note: When a hard disk is installed, the RAM disk feature is inactive.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
If selected, the Ignore application collation feature in the Compatibility
Settings dialog box lets the driver control collation. RAM disk can then increase
the print speed of collated multiple copies by sending the print job just once.
If a hard disk is not installed, you can set the RAM disk to save print requests
into the printing system's memory.
At the printing system's operation panel, turn on RAM disk and set its size.
In Device Settings, in the Device options list, select RAM disk.
At the RAM disk text box, type or select the size of the RAM disk by clicking the
up and down arrows until the text box shows the correct number of megabytes
(MB) available physically on the operation panel.
The maximum RAM disk size depends on the amount of installed memory.
Administrator Settings lets you set options, varying by your model, that
include controlling accessibility, displaying features in the interface and setting a
password to control access to the Administrator Settings options.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
Device Settings
2-4