Safety Instructions - Elation Design LED 72MKII Owner's Manual

2. SAFETY INSTRUCTIONS

1. This fixture has been specially designed for use outdoors. Altering or tampering
with the fixture housing in any way will neglect the IP rating and subsequently
release Elation Professional from any liability resulting from misuse of this
fixture.
2. Allow about 6" (15cm) between this fixture and other devices or a wall to allow
for proper cooling. See page 8.
3. Never touch the fixture during normal operation.
4. Never look directly into the light source. You risk injury to your retina, which may
induce blindness.
5. For safe operation, follow the Installation guide described in chapter six of this
manual. Operating the Design LED 72MKII™ without suited safety aids such as
safety cables or clamps can increase the risk of damage and/or personal injury.
6. Qualified and certified personnel should only perform installation.
7. When mounting this fixture, use only the original rigging points included with this
fixture. Any structural modification will void the original manufactures warranty
and may increase the risk of damage and/or personal injury.
8. Do not attempt to operate this fixture if the power cord has become damaged or
frayed.
9. Never open this fixture while in use.
10. This device falls under protection-class I. Therefore it is essential that the device
be grounded properly.
11. Qualified personnel should perform all electrical connections.
©Elation Professional, Los Angeles Ca.
To guarantee proper and consistent operation, it is important to
follow the guidelines in this manual. Elation Professional will not
accept responsibility for damages resulting from the misuse of
this fixture due to the disregard of the information printed in this
manual.
4
DESIGN LED 72MKII™
www.ElationLighting.com