5.4.9
5.4.9
5.4.9
Rebuilding a RAID set
Rebuilding a RAID set
Rebuilding a RAID set
5.4.9
5.4.9
Rebuilding a RAID set
Rebuilding a RAID set
The rebuild option is available only for RAID 1 and RAID 10 sets.
To rebuild a RAID set:
1.
From the main menu, select the RAID set you want to rebuild, then
press <Enter>.
2.
Press <R R R R R >.
While rebuilding the array, you can press <Esc> to stop. A pop-up menu
appears for confirmation. Select Y e s
the main menu.
A Build/Rebuild Completed message appears on screen to indicate
that you have successfully rebuilt the array.
3.
Press any key to return to the main menu.
5 - 4 4
5 - 4 4
5 - 4 4
5 - 4 4
5 - 4 4
Y e s to stop rebuilding and return to
Y e s
Y e s
Y e s
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n