5.
When prompted, insert the Red Hat
disk to the floppy disk drive, select O K ,
The drivers for the RAID controller are installed to the system.
6.
When asked if you will load additional RAID controller drivers:
•
For NCL-DE/1U model, select N o
•
For NCL-DE/SCSI model, select Y e s
RAID controller drivers (for Adaptec
7.
Follow screen instructions to continue the OS installation.
6 - 8
6 - 8
6 - 8
6 - 8
6 - 8
®
Enterprise ver. 3.0 RAID driver
O K ,
O K ,
O K , then press <Enter>.
O K ,
N o, then press <Enter>
N o
N o
N o
Y e s
Y e s, then install the additional
Y e s
Y e s
®
AIC-7902W).
C h a p t e r 6 : D r i v e r i n s t a l l a t i o n
C h a p t e r 6 : D r i v e r i n s t a l l a t i o n
C h a p t e r 6 : D r i v e r i n s t a l l a t i o n
C h a p t e r 6 : D r i v e r i n s t a l l a t i o n
C h a p t e r 6 : D r i v e r i n s t a l l a t i o n