Rebuilding A Raid Set - Asus KFSN4 DRE IKVM - Motherboard - SSI EEB 3.61 User Manual

5.2.3

Rebuilding a RAID set

To rebuild a RAID set:
From the Array List, use the up or down arrow keys to select the RAID set
1.
you want to rebuild, then press <Enter>. The RAID set details appear.
[Ctrl-X]Exit
2. Press <R>.
3. Use the up or down arrow keys to select a the RAID set you want to rebuild,
then press <F7>. A confirmation message appears.
RAID Mode: Striping
Striping Width: 1
Adapt
2
1
4. Press <Enter> to start rebuilding the
array, or <Esc> to cancel. The Array
List screen displays the RAID set
after rebuilding.
5-6
NVIDIA RAID Utility
- Array List -
Boot Id Status
Yes 2 Healthy
Yes 2 Healthy
[↑↓]Select [B]Set Boot
Array 1 : NVIDIA MIRROR
- Array Detail -
Channel M/S Index
1 Master 0
0 Master 1
[↑↓] Select [F6] Back
Mar 23 2006
Vendor Array
NVIDIA STRIPING
NVIDIA MIRRORING
[N]New Array
XXX.XXG
Striping Block: 64K
Disk Model Name
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
[F7] Finish
Rebuild array?
[Enter] OK
Chapter 5: RAID configuration
Model Name
XXX.XXG
XXX.XXG
[ENTER]Detail
Capacity
XXX.XXGB
XXX.XXGB
[Esc] Cancel