Table of Contents
Advertisement
3.
The A R R A Y S E L E C T I O N M E N U
A R R A Y S E L E C T I O N M E N U
A R R A Y S E L E C T I O N M E N U
A R R A Y S E L E C T I O N M E N U displays the available drives
A R R A Y S E L E C T I O N M E N U
connected to the SATA ports. Select the drives you want to include in
the RAID set, then press <SpaceBar>. When selected, the drive
indicator changes from R E A D Y
array number, and Y is the drive number.
The information of the selected hard disk drive displays at the bottom of
the screen.
4.
Select all the drives required for the RAID set, then press <Enter>.
The configurable array appears on screen.
5 - 6
5 - 6
5 - 6
5 - 6
5 - 6
R E A D Y to ONLIN A[X]-[Y]
R E A D Y
R E A D Y
R E A D Y
ONLIN A[X]-[Y], where X is the
ONLIN A[X]-[Y]
ONLIN A[X]-[Y]
ONLIN A[X]-[Y]
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
Advertisement
Table of Contents
