Denon AVR 4308CI - AV Network Receiver Manual page 18

COMMAND PARAMETER
Z3PS BAS UP
BAS DOWN
BAS **
BAS ?
TRE UP
TRE DOWN
TRE **
TRE ?
Z3 COMMAND : "*" parameter uses two ASCII characters. (see page4 J) section)
function
ZONE3 BASS UP/DOWN , direct change to **dB
**:00 to 99 by ASCII , 00=0dB
---AVR-4308 can be operated from -10 to +10(40 to 60)
Return Z3PSBAS Status
ZONE3 TREBLE UP/DOWN , direct change to **dB
**:00 to 99 by ASCII , 00=0dB
---AVR-4308 can be operated from -10 to +10(40 to 60)
Return Z3PSTRE Status
- 18 -
example
Z3PSBAS UP<CR>
Z3PSBAS DOWN<CR>
Z3PSBAS 00<CR>
Z3PSBAS ?<CR>
Z3PSTRE UP<CR>
Z3PSTRE DOWN<CR>
Z3PSTRE 00<CR>
Z3PSTRE ?<CR>