Denon AVR 4308CI - AV Network Receiver Manual page 16

COMMAND PARAMETER
Z2PS BAS UP
BAS DOWN
BAS **
BAS ?
TRE UP
TRE DOWN
TRE **
TRE ?
Z2 COMMAND : "*" parameter uses two ASCII characters. (see page4 J) section)
function
ZONE2 BASS UP/DOWN , direct change to **dB
**:00 to 99 by ASCII , 00=0dB
---AVR-4308 can be operated from -10 to +10(40 to 60) Z2PSBAS 00<CR>
Return Z2PSBAS Status
ZONE2 TREBLE UP/DOWN , direct change to **dB
**:00 to 99 by ASCII , 00=0dB
---AVR-4308 can be operated from -10 to +10(40 to 60) Z2PSTRE 00<CR>
Return Z2PSTRE Status
- 16 -
example
Z2PSBAS UP<CR>
Z2PSBAS DOWN<CR>
Z2PSBAS ?<CR>
Z2PSTRE UP<CR>
Z2PSTRE DOWN<CR>
Z2PSTRE ?<CR>