Denon AVR 4308CI - AV Network Receiver Manual page 12

COMMAND PARAMETER
PS TRE UP
TRE DOWN
TRE **
TRE ?
DRC AUTO
DRC LOW
DRC MID
DRC HI
DRC OFF
DRC ?
DCO OFF
DCO LOW
DCO MID
DCO HIGH
DCO ?
LFE UP
LFE DOWN
LFE **
LFE ?
EFF ON
EFF OFF
EFF **
EFF ?
DEL UP
DEL DOWN
DEL ***
DEL ?
AFD ON
AFD OFF
AFD ?
PS COMMAND : "*" parameter uses two or three ASCII characters. (see page4 J) section)
function
TREBLE UP/DOWN , direct change to **dB
**:00 to 99 by ASCII , 50=0dB
---AVR-4308 can be operated from -6 to +6(44 to 56) PSTRE 50<CR>
Return PSTRE Status
DRC direct change
D.COMP direct change
Return PSDCO Status
LFE UP/DOWN , direct change to **dB
**:00 to 99 by ASCII , 00=0dB, 10=-10dB
---AVR-4308 can be operated from 0 to -10
Return PSLFE Status
EFFECT ON/OFF , EFFECT LEVEL direct change to **dB
**:00 to 99 by ASCII , 00=0dB, 10=10dB
---AVR-4308 can be operated from 1 to 15
Return PSEFF Status
DELAY UP/DOWN , direct change to ***dB
***:000 to 999 by ASCII , 000=0ms, 300=300ms
---AVR-4308 can be operated from 0 to 300
Return PSDEL Status
AFDM ON/OFF
Return PSAFD Status
- 12 -
example
PSTRE UP<CR>
PSTRE DOWN<CR>
PSTRE ?<CR>
PSDRC AUTO<CR>
PSDRC LOW<CR>
PSDRC MID<CR>
PSDRC HI<CR>
PSDRC OFF<CR>
PSDRC ?<CR>
PSDCO OFF<CR>
PSDCO LOW<CR>
PSDCO MID<CR>
PSDCO HIGH<CR>
PSDCO ?<CR>
PSLEE UP<CR>
PSLFE DOWN<CR>
PSLFE 10<CR>
PSLFE ? <CR>
PSEFF UP<CR>
PSEFF DOWN<CR>
PSEFF **<CR>
PSEFF ?<CR>
PSDEL UP<CR>
PSDEL DOWN<CR>
PSDEL ***<CR>
PSDEL ?<CR>
PSAFD ON<CR>
PSAFD OFF<CR>
PSAFD ?<CR>