Passwords - Gateway NX100X - Core Solo 1.06 GHz Reference Manual

Your wireless network is listed as a preferred network, but
it has an "x" on it
•
Internet Explorer is unable to access the Internet
•
•
You cannot see other computers on your network
•
•
You cannot connect to your network
•

Passwords

Your notebook does not accept your password
Make sure that C
retype the password.
110
CHAPTER 9: Troubleshooting
An x means your preferred network is not currently
available or you are not currently in range to connect.
Reset the power on your cable or DSL modem and your
access point. This reestablishes communication
between your Internet Service Provider and your
modem and between your modem and your access
point.
If you previously accessed the Internet through a
dial-up modem, Internet Explorer may not be set up to
access the Internet through a network. Remove the
dial-up connection in the Internet Options in Internet
Explorer.
Your notebook may not have the same workgroup
name as the other computers on your network. For
more information, see "Naming the computers and
workgroup" in your online User Guide.
If your notebook was previously connected directly to
your cable or DSL modem, and your ISP requires you
to use a static IP address, your notebook is not set up
to use a DHCP server. Modify the network properties so
your notebook is set up for using a DHCP server.
If your notebook is a member of a domain at your
workplace, you may not be able to connect your
notebook to your home network workgroup to access
shared files or printers on your home network. You may,
however, be able to access the Internet through your
home network.
Caution
If your notebook was a member of a domain before you join a
workgroup, it is disjoined from the domain and your computer account
disabled. Contact your company computer department or network
administrator for more information.
APS LOCK
and N are turned off, then
UM LOCK