Changing Copy Quality - Brother DCP-395CN User Manual

You can change the copy settings temporarily
for the next copy.
These settings are temporary, and the
machine returns to its default settings
1 minute after copying.
If you have finished choosing settings, press
Black Start or Color Start.
If you want to choose more settings,
press a or b.
Note
You can save some of the settings that
you use most often by setting them as
default. These settings will stay until you
change them again. (See Setting your
changes as the new default on page 35.)

Changing copy quality

You can choose the copy quality. The factory
setting is Normal.
Fast copy speed and lowest
Fast
amount of ink used. Use this
setting to save time (documents to
be proof read, large documents or
many copies).
Even if you set this option the copy
speed will be slower with
Ink Save Mode, Book Copy or
Watermark Copy turned on.
Recommended setting for ordinary
Normal
printouts. Good copy quality with
adequate copy speed.
Use this setting to copy precise
Best
images such as photographs. The
highest resolution and slowest
speed.
a
Load your document.
b
Enter the number of copies you want.
c
Press a or b to choose Quality.
d
Press d or c to choose Fast, Normal or
Best.
Press OK.
e
If you do not want to change additional
settings, press Black Start or
Color Start.
Making copies
4
4
29