Brother DCP-395CN User Manual page 109

d
Lift the machine from the front and hook
the tab of the green protective part into
the keyed opening (1) on the bottom of
the paper tray . Then latch the protective
part over the raised portion of the paper
tray (2).
2
e
Unplug the machine from the AC power
outlet.
f
Using both hands, use the plastic tabs
on both sides of the machine to lift the
scanner cover until it locks securely into
the open position. Then unplug the
interface cable from the machine, if it is
connected.
g
Lift the scanner cover to release the
lock ( ). Gently push the scanner cover
support down ( ) and close the
scanner cover ( ).
2
1
1
3
Troubleshooting and Routine Maintenance
h
Wrap the machine in the bag.
i
Pack the machine and the printed
materials in the original carton with the
original packing material as shown
below.
Do not pack the used ink cartridges in
the carton.
Note
If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts and printed materials to use with
your 'Exchange' machine.
j
Close the carton and tape it shut.
B
97