Canon MX870 Series User Manual page 60

Use the Numeric buttons to specify the number of copies.
(2)
Note
may appear on the LCD while reading photos. If you use the
Scroll Wheel ) to display the photo while
not be selected.
If you press the center Function button (D), the screen will switch to the full-screen
display. You can also specify the number of copies on this screen.
If you press the center Function button again, the screen will switch to the trimming
screen. You can crop photos.
See
Other Useful Functions
Repeat the procedures of (1) and (2) to specify the number of copies for each
(3)
photo.
Note
If you select a photo for which the number of copies is not specified (copies "00") and press
the button, "01" is set for the number of copies and the screen to change the number of
OK
copies will appear.
Use the
or button (
copies, and press the
4.
Start printing.
Press the right Function button (E) to select Print settings, and confirm the
(1)
page size, media type, print quality, etc.
Here we confirm that 4"x6" (10x15cm) is selected for Page size and the type of loaded photo paper for
Type.
To change the settings, use the
or button to select an option. After confirming or changing the settings, press the
return to the photo selection screen.
See
Basic Operation on the Settings Screen
Note
You can specify Photo fix or Print date on the print settings screen.
See Changing the Settings
Confirm the number of sheets to be used for printing the selected photos.
(2)
appears on the LCD, the desired photo may
.
) or the Numeric buttons to specify the number of
Scroll Wheel
button to return to the screen in (1).
OK
or
button (
Scroll Wheel
Changing the Settings
and
.
, ,
, or button (
) to select the item to change, and use the
OK button to
.