Reducing Printer Noise; Adjusting Power Saver - Lexmark 34S0409 - E 360dt B/W Laser Printer User Manual

4
Press the arrow buttons until Eco‑Mode appears, and then press
5
Select the setting you want, and then press
Submitting changes appears.

Reducing printer noise

Use Quiet Mode to reduce the printer noise.
Note: See the table for the multiple settings that change when you select a Quiet Mode setting.
Choose
On
Off
To select a Quiet Mode setting:
1
From the printer control panel, press
2
Press the arrow buttons until Settings appears, and then press
3
Press the arrow buttons until General Settings appears, and then press
4
Press the arrow buttons until Quiet Mode appears, and then press
5
Select the setting you want, and then press
Submitting changes appears.

Adjusting Power Saver

To save energy, you can decrease the number of minutes the printer waits before it enters Power Saver mode.
Available settings range from 1–240 minutes. The factory default setting is 30 minutes.
Using the Embedded Web Server
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP
address in the TCP/IP section.
2
Click Settings, and then click General Settings.
3
Click Timeouts.
.
To
Reduce printer noise.
Use factory default settings. This setting supports the
performance specifications for your printer.
.
.
Minimizing your printer's environmental impact
28
.
•
You may notice a reduction in processing speed.
• Printer engine motors do not start until a job is ready to
print. You may notice a short delay before the first page
is printed.
• Fans run at a reduced speed or are turned off.
• If your printer has faxing capability, fax sounds are
reduced or disabled, including those made by the fax
speaker and ringer.
.
.
.