Ordering A Waste Toner Box; Ordering A Fuser; Ordering Photoconductors; Moving The Printer - Lexmark 34B0185 - High Voltage Laser Printer Maintenance Manual

Ordering a waste toner box

When 82 Waste Toner Box Nearly Full or 82 Replace Waste Toner Box appears, you need to
order a replacement waste toner box.
Part number
C52025X

Ordering a fuser

When Fuser Life Warning appears, replace the fuser soon. Make sure one is on order.
When Replace Fuser appears, replace the fuser immediately. For installation information, see the documentation
that came with the fuser.
Part number
40X3569 (120V/50–60Hz)
40X3570 (220–240V/50–60Hz)
40X3571 (100V/50–60Hz)

Ordering photoconductors

When Black PC Unit Life Warning or Cyan PC Unit Life Warning, Magenta PC Unit Life
Warning, or Yellow PC Unit Life Warning appears, you need to order replacement photoconductor(s).
Part number
C53030X
C53034X

Moving the printer

Before moving the printer

CAUTION—POTENTIAL INJURY: The printer weighs 25.40 kg (56 lb); therefore, it requires at least two people to
lift it safely. Use the handholds on the sides of the printer to lift it, and make sure your fingers are not under the
printer when you set it down.
Follow these guidelines to avoid personal injury or printer damage:
•
Always use at least two people to lift the printer.
•
Always turn off the printer using the power switch before moving it.
Part name
Waste toner box
Part name
Fuser
Part name
Photoconductor Unit
Photoconductor Unit, Multi‑Pack
Maintaining the printer
7