Ordering Photoconductors; Ordering A Fuser Or A Transfer Module; Ordering A Waste Toner Box - Lexmark C 736N Supplies Manual

When 88 Replace Cyan cartridge, 88 Replace Magenta cartridge, 88 Replace Yellow
cartridge, or 88 Replace Black cartridge appears, you
Estimated cartridge yield is based on the ISO / IEC 19798 standard (with about 5% coverage per color). Extremely low print
coverage (less than 1.25% for a color) for extended periods of time may negatively affect actual yield for that color and may
cause cartridge parts to fail prior to exhaustion of toner.

Ordering photoconductors

When , 84 photoconductor low, or 84 <color> photoconductor nearly low appears, order a replacement
photoconductor.
When 84 Replace <color> photoconductor appears, you
Part name
Photoconductor
Photoconductor, Multi-Pack

Ordering a fuser or a transfer module

When 80 Fuser Life Warning or 83 Transfer Module Life Warning appears, order a replacement fuser or a
transfer module.
When 80 Replace Fuser or 83 Replace Transfer Module appears, install the new fuser or the new transfer
module. For installation information, see the documentation that came with the part.
Part name
Fuser
Transfer Module

Ordering a waste toner box

When 82 Waste toner box nearly full appears, order a replacement waste toner box. When 82 Replace waste
toner box appears, you
Note: Waste toner box reuse is not recommended.
Part name
Waste Toner Box
replace the waste toner box.
replace the specified cartridge.
replace the specified photoconductor.
Part number
C734X20G
C734X24G
Part number
40X5095 (100 volt)
40X5093 (115 volt)
40X5094 (230 volt)
40X5096
Part number
C734X77G
Supplies guide
Page 2 of 2