Lexmark 33S0300 - Mono Chrome Laser Printer Reference page 254

Table 4-8: Page Device Parameters (Continued)
Key
PageSize
Policies
PostRenderingEnhance
Type Definition
array Specifies the size (width and height) of the current page in 1/72 inch units. A
value of [0 0] is assumed to be the lower left corner of the physical page and
[width height] is the upper right corner.
dictionary Uses entries to describe the actions to perform when a particular function cannot
be completed. The entries are as follows:
PageSize is an integer that specifies what recovery action to use when PageSize
cannot be matched with any available media (paper, envelope, or other print
materials). The actions are:
0
1
2
3
4
5
6
7
23
PolicyNotFound is an integer that specifies which recovery action to use when a
requested feature other than PageSize cannot be matched with any key in the
Policies dictionary.
The actions are:
0
1
2
PolicyReport is a procedure that is called when a successful setpagedevice is
finished. The procedure consults policies to process unsatisfied feature requests
if needed. Default value is {pop}.
boolean Always True to indicate that PostRenderingEnhanceDetails is enabled.
4-59
Generate a configurationerror. (default)
Ignore the requested PageSize.
Interact with a human operator or print manager.
Select the next larger or smaller available media and adjust the
page to fit.
Select the next larger available media and adjust the page to fit.
Select the next larger or smaller available media, but do not adjust
the page.
Select the next larger available media, but do not adjust the page.
Disable media selection. Implement the requested PageSize on the
previously selected media without making adjustments. The way
the image is positioned on the media is printer-dependent and may
result in part of the image being clipped.
If the SubstituteSize parameter from the DeviceRenderingInfo
dictionary is set to Off, the effective policy executed is the value of
the DefaultPageSizePolicy key in the DeviceRenderingInfo
dictionary. If the SubstituteSize parameter from the
DeviceRenderingInfo dictionary is set to a value other than Off
and an installed source has installed media which may be
substituted for the requested media, the effective policy executed is
3. If the SubstituteSize parameter from the DeviceRenderingInfo
dictionary is set to a value other than Off and a media substitution
cannot be made, the effective policy executed is the value of the
DefaultPageSizePolicy key in the DeviceRenderingInfo
dictionary.
Generate a configurationerror.
Ignore the requested feature (default).
Interact with a person or print manager.
PostScript