Lexmark 33S0300 - Mono Chrome Laser Printer Reference page 146

Printer Unique Variables for PCL Emulation
The following variables are unique to your printer and are supported in PCL emulation
only. The
For example:
@PJL SET LPARM:PCL LBITMAPROUNDING=OFF[<CR>]<LF>
To determine which variables your printer supports, see "Table B-4: Printer Unique
Variables for PCL Emulation" on page B-12.
Table 3-6: Printer Unique Variables for PCL Emulation
Variable
LA4WIDTH
LASSIGNFEEDER
LASSIGNMANUALENVELOPE
LASSIGNMANUALPAPER
LASSIGNMPFEEDER
[command modifier:value]
Function Selections
A4 Width in 198, 203
millimeters
Tray Renumber OFF, 0 to 199
Assign Envelope
Variable used with PJL SET or DEFAULT
Feeder
command.
OFF, 0 to 199, NONE
Variable used with PJL INQUIRE or DINQUIRE
command.
Tray Renumber OFF, 0 to 199
Assign Manual
Variable used with PJL SET or DEFAULT
Envelope
command.
OFF, 0 to 199, NONE
Variable used with PJL INQUIRE or DINQUIRE
command.
Tray Renumber OFF, 0 to 199
Assign Manual Paper
Variable used with PJL SET or DEFAULT
command.
OFF, 0 to 199, NONE
Variable used with PJL INQUIRE or DINQUIRE
command.
Tray Renumber OFF, 0 to 199
Assign Multipurpose
Variable used with PJL SET or DEFAULT
Feeder
command.
OFF, 0 to 199, NONE
Variable used with PJL INQUIRE or DINQUIRE
command.
3-49
parameter should be specified as
PJL
: .
LPARM PCL
Factory Default
198
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF