Printer Unique Variables For Both Printer Languages - Lexmark 33S0300 - Mono Chrome Laser Printer Reference

Table 3-3: Common Variables for Both Printer Languages (Continued)
Variable
USERNAME
(SET only)
WIDEA4

Printer Unique Variables for Both Printer Languages

The following variables are unique to some Lexmark printers and are supported for
both PCL emulation and PostScript emulation. Therefore, the [
modifier:value
To determine which variables your printer supports, see "Table B-2: Printer Unique
PJL Variables for Both Printer Languages" on page B-4.
Table 3-4: Printer Unique Variables for Both Printer Languages
Variable
LACTIVEBINRESET
(DEFAULT only)
LADVANCEDSTATUS
(DEFAULT only)
(Port specific)
LALARMCONTROL
(DEFAULT only)
LAUTOCRLF
LAUTOLFCR
LBLANKPAGES
LBONDLENGTH
(DEFAULT only)
LBONDLOADING
(DEFAULT only)
Function Selections
Print and Hold "username"
Username
username is a text string truncated to 24 characters.
Note: A null (" ") string is an acceptable value and
indicates no Print and Hold Username is specified.
A4 width NO, YES
NO indicates the A4 width is 198 mm.
YES indicates the A4 width is 203 mm.
] parameter should not be specified.
Function Selections
Active Bin MANUAL, AUTOMATIC
Reset
Advanced ON, OFF
Status
ON enables parallel bidirectional support.
OFF disables parallel bidirectional support.
Alarm Control OFF, SINGLE, CONTINUOUS
Auto CR after ON, OFF
LF
Auto LF after ON, OFF
CR
Blank Pages DONOTPRINT, PRINT
Note: Some printers have a fixed value of
DONOTPRINT.
Bond Length NORMAL, SHORT
Bond Paper OFF, DUPLEX
Loading
3-19
Factory Default
NULL
(No username)
NO
command
Factory Default
MANUAL
ON
SINGLE
OFF
OFF
DONOTPRINT
NORMAL
OFF
PJL