Eoj Command - Lexmark 33S0300 - Mono Chrome Laser Printer Reference

For detailed information on PJL password protection, see "File and Device
Protection Commands" on page 3-93.
Note: Setting a default PJL password disables the use of PJL DEFAULT and
INITIALIZE commands. (See "DEFAULT Command" on page 3-8 and
"INITIALIZE Command" on page 3-11.)

EOJ Command

The EOJ command signifies the end of a print job.
Syntax:
@PJL EOJ [NAME = "job name"][<CR>]<LF>
Note:
Only use the EOJ command in conjunction with the JOB command.
Parameter:
NAME = "job name"
Use the NAME parameter to assign a character string name to a particular job.
The name may be any combination of printable characters, spaces, or horizontal
tabs up to a maximum of 80 characters, spaces, or tabs. The NAME string may
be different from the NAME string specified in the JOB command. The
must be enclosed in double quotes.
3-6
PJL
job name