Lexmark 33S0300 - Mono Chrome Laser Printer Reference page 149

Printer Unique Variables for PostScript Emulation
The following variables are unique in some printers and are supported in PostScript
emulation only.
The
[command modifier:value]
For example:
@PJL SET LPARM:POSTSCRIPT LPICTUREGRADE=ON[<CR>]<LF>
To determine which variables your printer supports, see Table B-6 on page B-13.
Table 3-8: Printer Unique Variables for PostScript Emulation
Variable
LPICTUREGRADE™
LPSFONTPRIORITY
Printer Unique LRESOURCE Variables
Use the following variables when additional storage devices are installed.
The
and SET commands must be specified as
For example:
@PJL DEFAULT LRESOURCE : "device:filename.filetype"LDESCRIPTION="my
description"[<CR>]<LF>
Values for
Using the DEFAULT command to modify any of these variables forces a write to flash
or disk if resource collection mode is set to On before the command is executed. The
DEFAULT command causes a PJL Reset.
Function Selections
TM
PictureGrade ON, OFF
Font Priority RESIDENT, FLASHDISK
[command modifier:value]
"device:filename.filetype"
,
device flash flash1
A unique identifier for a file, such as the macro ID for a PCL
filename
macro, the symbol set ID for a PCL symbol set, the font ID for a
PCL font, or the actual file name for data, Type 1 fonts, and
demo files as shown on the Directory. The
sensitive.
The identifier that categorizes the file, such as
filetype
macros or
3-52
parameter should be specified as
parameter of the DEFAULT, INQUIRE, DINQUIRE,
LRESOURCE:"device:filename.filetype"
are:
, , or (case insensitive)
disk disk1
for PCL symbol sets.
p5symset
PJL
: .
LPARM POSTSCRIPT
Factory Default
ON
RESIDENT
.
is case
filename
for PCL
p5macro