Lexmark 33S0300 - Mono Chrome Laser Printer Reference page 185

Table 3-22: Variables for Flash and Disk File and Password Commands (Continued)
Parameter Syntax
filedevice
DEVICE =
flashdevice
DEVICE =
filename
FILENAME = "fname"
OLDFILENAME = "fname"
NEWFILENAME = "fname"
Description
filedevice
File storage media. Case insensitive.
flash
flash1
disk
disk1
rom
rom
The value is used for the LRUNFILE command only.
Note: The command is ignored if the device is not installed.
flashdevice
File storage media.
flash
flash1
"Fname" is comprised of a filename, a unique identifier for a file, and a
filetype, which specifies the type of file. The format is
filename.filetype
filename
The
macro ID
symbol set ID
font ID
actual filename
filetype
The
t1
sFnt5
bFnt5
MAC5
data
type1
demo
p5scalable
p5bitmap
p5macro
p5symset
ppdsbm
xlmacro
All fname specifications must be enclosed in quotation marks and cannot
exceed 127 characters.
If the file is password-protected, the password must be provided in order to
unlock the file.
For additional information about passwords, see "File and Device Protection
Commands" on page 3-93.
3-88
.
must be one of the following:
PCL macros
PCL symbol sets
PCL fonts
data, Type 1 fonts, demo files
(case sensitive)
must be one of the following:
PostScript font
PCL scalable font
PCL bitmap font
PCL macro
User Data
PostScript font
Demo
PCL scalable font
PCL bitmap font
PCL macro
PCL symbol set
PPDS bitmap font
PCL XL user stream
PJL