Lexmark 33S0300 - Mono Chrome Laser Printer Reference page 115

Table 3-3: Common Variables for Both Printer Languages (Continued)
Variable
POWERSAVETIME
(DEFAULT only)
QTY
(SET only)
REPRINT
RESOLUTION
RESOURCESAVE
(DEFAULT only)
RET
TIMEOUT
Function Selections
Power Save time, 0 to 120 (Model specific)
in minutes
0 to 240 (Model specific)
(0 indicates the Power Saver Time feature is disabled.)
The time the printer remains idle before it enters
Power Save mode when POWERSAVE is On.
Note: If a value greater than 120 or 240 is specified by
a SET or DEFAULT command, the value is changed to
120 or 240 based on the printer model.
Collation - 0 to 999
Collated Copies
Used to request the number of collated copies of a
(QTY)
print job.
If Collation - Collated Copies (QTY) is not equal to 0, a
DINQUIRE or INQUIRE returns the numerical setting
for QTY. If Collation - Collated Copies (QTY) is set to
Off, a DINQUIRE or INQUIRE returns 0.
Note: If a value greater than 999 is specified by a SET
or DEFAULT command, the value is changed to 999.
Jam Recovery ON, OFF, AUTO
Print Resolution 300, 600, 1200
Resource Save ON, OFF, AUTO
ON indicates Resource Save is set On.
OFF and AUTO indicate Resource Save is set to Off.
See "Table B-1: Common Variables for Both Printer
Languages" on page B-1 for the default value of your
printer.
Print Quality OFF, DARK, MEDIUM, LIGHT, ON
Enhancement
If this value is set through PJL, the same value is
Technology
returned on a PJL inquiry.
(PQET)
DARK, MEDIUM, LIGHT, and ON values indicate that
PQET is On. OFF indicates PQET is Off.
Print timeout, 0 to 255
in seconds
The time the printer remains idle before the job is
forced to print.
Note: If a value greater than 255 is specified by a SET
or DEFAULT command, the value is changed to 255.
3-18
Factory Default
20
0
AUTO
600
OFF, AUTO
(Model specific)
ON
90
PJL