Configuring The Black-And-White Print Priority Settings - Sharp DX-C200P Software Manual

I/O Timeout
Item
Fixed USB Port
Locked Print Timeout
(seconds)

Configuring the Black-and-White Print Priority Settings

Click the [B&W Print Priority] tab on the system settings page to configure the B&W print priority settings.
Specifies whether the same printer driver can be used for multiple printers
or not under USB connection.
If this setting is enabled, the same printer driver you have installed in your
computer can be used with any printer other than the one originally used
for installation, if the printer is of the same model.
If disabled, you must install the printer driver separately for individual
printers, because the printer other than the original will be recognized as a
new device upon USB connection.
Specifies how many seconds the printer holds a new Locked Print file, when
the printer cannot store any more Locked Print files (0 to 300 seconds).
Within this time, you can print or delete the new Locked Print file. You can
also print or delete an existing Locked Print file so that the new Locked Print
file can be stored in the printer.
Configuring the System Settings
Description
83