Configuring The Snmp Settings - Sharp DX-C200P Software Manual

Hide thumbs Also See for DX-C200P:
Table of Contents

Advertisement

E-mail Notification 1/E-mail Notification 2
Item
Display Name
E-mail Address
Paper Misfeed
Out of Paper
Toner Almost Empty
Call Service
Out of Toner
Cover Open

Configuring the SNMP Settings

Click the [SNMP] tab on the network settings page to configure the SNMP settings.
SNMP
Item
SNMP
Enter a sender name for alert e-mail. Can contain up to 32 characters.
Enter the address of the recipient of the alert email. Can contain up to 64
characters.
Select to send an alert e-mail to the specified address if a paper jam occurs.
Select to send an alert e-mail to the specified address if paper runs out.
Select to send an alert e-mail to the specified address if toner becomes low.
Select to send an alert e-mail to the specified address if the printer requires
servicing.
Select to send an alert e-mail to the specified address if toner runs out.
Select to send an alert e-mail to the specified address if a cover is open.
Select whether to enable the printer to use SNMP services.
Configuring the Network Settings
Description
Description
91

Advertisement

Table of Contents
loading

Table of Contents