Table of Contents
Advertisement
English
0
Menu
Brightness
Temperature
(p. 37)
Gamma
(p. 37)
Saturation
Hue
Gain
Reset
26
4. ADJUSTMENT
Function Descriptions
To set the brightness of the
screen
NOTE
Directly pressing the up or down buttons also can adjust the brightness.
To set the color temperature
0
NOTE
The values shown in the Kelvin are available only as a reference tool.
Setting the temperature under 4,000 K or over 10,000 K invalidates the
color temperature setting. (The color temperature's setting turns "OFF".)
To set the gamma value
NOTE
If setting the gamma value, the using the monitor in the digital signal
input is recommended.
To change the saturation
NOTE
The <Saturation> adjustment may cause undisplayable color tone.
To change the flesh color, etc. -32 ~ 32
NOTE
The <Hue> adjustment may cause undisplayable color tone.
To change each color
(red, green and blue)
NOTE
The values shown in the percentage are available only as a reference
tool.
Setting the <Temperature> (p. 37) invalidates the <Gain> adjustment.
<Gain> setting returns to the default setting.
To return the color settings of
the selected mode to the
default settings
Adjustable range
0 ~ 100%
4,000 ~ 10,000 K
in 500 K increments (including 9,300 K).
Default setting is off (normal white)
1.8 ~ 2.6 (in 0.2 increments)
-128 ~ 127
Setting the minimum level (-128) turns the
image to the monochrome.
0 ~ 100%
By adjusting the red, green and blue color
tones for each mode, custom colors can be
defined. Display a white or gray background
image and adjust the <Gain>.
Select the <Reset>.
Advertisement
Table of Contents
