Table of Contents
Advertisement
English
4.
ADJUSTMENT
The monitor displays the digital input image correctly based on its
pre-setting data.
4-1. Screen Adjustment
Screen adjustments for the LCD monitor should be used in suppressing screen
flickering and also for adjusting the screen to its proper position. There is only one
correct position for each display mode. It is also recommended to use the
ScreenManager function when first installing the display or whenever changing the
system. For convenience, an easy set-up Program installed on the utility disk to assist
in the set-up procedure is provided.
NOTE
Allow the LCD monitor to stabilize for at least 20 minutes before making image
adjustments.
Adjustment Procedure
1.
Push the Auto adjustment button on the front panel.
The message "Your setting will be lost, if you press again now." appears and
remains on the screen for 5 seconds. While the message is on the screen, push
the Auto adjustment button again to automatically adjust the clock, phase,
screen position and resolution. If you do not wish to do adjust the screen, do
not push the Auto adjustment button again.
NOTE
The Auto sizing function is intended for use on the Macintosh and on
AT-compatible PC running Windows. It may not work properly in either
of the following cases.
When running an AT-compatible PC on MS-DOS (Not windows). The
background color for the "wall paper" or "desktop" pattern is set to black.
If the appropriate screen cannot be made by using the Auto
adjustment button, adjust the screen through the following
procedures. If the appropriate screen can be made, proceed to
step 4 (p. 24).
22
4. ADJUSTMENT
Advertisement
Table of Contents
