English
Default Settings
CAL Switch Mode
Brightness
PowerManager
Off Timer
Menu Settings
Language
Signal Selection*
Orientation*
* These functions cannot be initialized with a reset function (p.18). For information about
setting these functions, refer to p.15
Optional
Panel Protector
Arm, Stand
Graphics board
Calibration Kit
Network QC
Management Software
Cleaning kit
34
9. SPECIFICATIONS
1-DICOM
Fixed at the factory
DVI DMPM
Disable
Menu Position
Center
Menu Off Timer
45 seconds
English
Monochrome 8-bit
Portrait (HW)
EIZO "RP-903" (GS220-CL only)
EIZO "LS-HM1-D": Dual Height Adjustable Stand
EIZO "LA-131-D":
EIZO "LA-030-W":
EIZO "LA-011-W":
8bit and 10bit signals supported
• RealVision "VREngine/SMD2-PCI"
• Matrox "MED2mp-PPP"
• Matrox "AURORA VX3mp"
8bit signal supported
• RealVision "VREngine/SMD5-PCI"
• RealVision "VREngine/CMD2W"
• Matrox "MED3mp-PPP"
• Matrox "MED5mp-PPP"
• Matrox "RAD-PCI"
EIZO "RadiCS UX1 "Ver.2.5.0 or later
EIZO "Clip-On Swing Sensor G1" (GS220-CL only)
EIZO "RadiNET Pro" Ver.2.5.0 or later
EIZO "ScreenCleaner"
LCD Monitor Flexible Arm
Wall Mount Arm for LCD Monitor
Wall Mount Arm for LCD Monitor