Eizo RadiForce GS220 User Manual page 22

Off Timer <Others>-<Off Timer>
The off timer function causes the monitor to turn off automatically after a
predetermined amount of time has lapsed. This function was created to reduce the
afterimages particular to LCD monitors, which appear when the screen is left on for
long periods without use.
[How to set]
(1) Select <Off Timer> in the ScreenManager <Others> menu.
(2) Select "Enable" and touch the Right and Left directing switches to adjust the
operating time (1 to 23 hours).
[Off timer system]
PC
Operating time (1H - 23H)
Last 15 min. in operating time
Operating time expired
*1
By touching the power switch on the control panel during the Advance Notice period, the
operating time can be reset to 90 minutes. Resetting can be performed an unlimited number
of times.
[How to restore power]
Touch the power switch to return to a normal screen.
NOTE
• The off timer function works while the PowerManager is active, but there is no
advance notice before the monitor's power is turned off.
Power Indicator Function <Others>-<Power Indicator >
Use the function to keep the power indicator without light while the monitor is
operational. (The power indicator is set by default to light when the power is turned
on.)
[How to set]
(1) Select <Power Indicator> in the ScreenManager <Others> menu.
(2) Select "Disable".
Monitor
Operational
*1
Advance Notice
Power off
3. ADJUSTMET & SETTINGS
English
Power Indicator
Green
Flashing green
Flashing orange slowly
21