Oki Pacemark PM4410 Setup Manual page 30

Setup guide for the pm4410

Hide thumbs Also See for Pacemark PM4410:

Table of Contents

4. Center the support between the tractors, then position the paper

guide (1) over the support (2).

Right Tractor (viewed from the back of the printer)

1. Open the tractor pin cover, place the paper holes on the pins, then

close the cover.

2. Move the tractor to align the edge of the paper with the appropriate

reference mark (1: this sets the print indent from the paper edge at 0

to 1.5 inches in 0.1-inch increments), then push the lock lever back.

E-28

Untitled-1

Pacemark 4410 Setup Guide

11/30/98, 1:35 PM

Table of Contents