Oki Pacemark PM4410 Setup Manual page 27

The printer is set to a default front-feed paper width of 13.6
inches (136 columns). If you are using 9-inch paper, you
must enter the printer menu and change the setting to 8
inches (80 columns) to avoid printing on the platen and
damaging the printhead. Other paper widths must be set
using your software application.
To change the menu setting to 8 inches, turn the printer on,
then:
a. Press
b. Press
c. Press
d. Press
An asterisk (*) appears next to the setting.
e. Press
f. Press
setting.
The Top of Form (TOF) for the front feed paper path is set at the
factory to 0.35 inch (9 mm) down from the top of the page. If this
setting does not suit your application, you will need to set the Top of
Form: see "Setting Top of Form" in the Front Panel Overview section
of this Setup Guide.
Pacemark 4410 Setup Guide
Untitled-1
.
MENU
until Front Feed appears on the display.
GROUP
until Page Width appears on the display.
ITEM
once to switch to the 8-inch setting.
OPTION
to save the 8-inch setting.
STORE
to exit the menu mode and save the new
MENU
25
E-25
11/30/98, 1:34 PM